PCB Surface Finish Selection Guide
Quality & Inspection Standards
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
PCB Surface Finish Selection Guide
The surface finish determines solderability, shelf life, and long‑term reliability of every PCB pad. From ENIG to immersion silver, from HASL to ENEPIG, the wrong choice leads to black pad, gold embrittlement, or solderability failures. This section covers selection criteria, failure modes, and process trade‑offs for every major surface finish.
ENIG vs ENEPIG Comparison
Detailed comparison of electroless nickel/immersion gold and electroless nickel/electroless palladium/immersion gold. Cost, wire bondability, and black pad risk analyzed.
Compare ENIG & ENEPIG →ENIG vs HASL vs OSP
The classic surface finish comparison for cost‑sensitive designs. Shelf life, coplanarity, and assembly process compatibility for each option.
See the Comparison →Black Pad Failure Analysis
The ENIG reliability nightmare: hyper‑corrosion of the nickel layer, phosphorus‑rich interface, and brittle solder joints. Root causes and prevention.
Understand Black Pad →Gold Embrittlement in ENEPIG
When gold thickness exceeds safe limits, solder joints become brittle. Learn the 3% weight‑percent threshold and process control methods.
Read the Guide →Surface Finish for RF PCB
At mmWave frequencies, surface roughness and finish conductivity dominate insertion loss. ENIG, immersion silver, and bare copper compared.
Explore RF Finishes →Immersion Silver Solderability
Immersion silver offers excellent solderability but is sensitive to sulfur and humidity. Shelf life, tarnish prevention, and process controls.
Learn About Silver →Best Surface Finish for Class 3 PCB
For aerospace, medical, and defense applications, the surface finish must meet IPC‑6012 Class 3 reliability requirements. Our recommendations.
Download Selection Guide →Need help selecting the right surface finish for your high‑reliability PCB?
Talk to Our Engineering Team →Get Custom Quote
PRODUCTS CENTER


