HDI PCB Design & Microvia Reliability

HDI PCB Design & Microvia Reliability

Quality & Inspection Standards

PRODUCTS CENTER

Get Custom Quote

PRODUCTS CENTER

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit

HDI PCB Design & Microvia Reliability

HDI technology enables dense component placement and high‑speed signal routing, but microvia reliability defines whether your board survives reflow, thermal cycling, and years of field operation. This section covers design trade‑offs, manufacturing limits, and IPC‑6018 qualification requirements.

When to Use HDI PCB Design

BGA pitches below 0.8 mm, high I/O density, and board thickness constraints force the move to HDI. Learn the decision criteria and cost inflection points.

Read More →

Microvia Structure and Manufacturing

Laser drilling, plating, and fill processes. Understand the three types of microvias — blind, buried, and through — and the IPC‑6018 aspect ratio limits.

Explore Structures →

Stacked vs Staggered Microvias

Stacked vias save space but introduce reliability risks at the copper‑to‑copper interface. Staggered vias are safer but consume more routing area. Compare failure modes.

Compare →

Via‑in‑Pad (VIPPO) Design Guide

Placing vias directly in component pads saves space but demands precise fill, planarization, and cap plating. Design rules to avoid voiding and tombstoning.

Read Guide →

Laser Via Reliability Risks

Incomplete copper plating, glass protrusion, and via‑bottom cracks — the common failure signatures and how to specify process controls to avoid them.

Learn Risks →

CAF Failure in HDI PCB

Conductive anodic filament growth is accelerated by tight HDI spacing. Root causes, test methods, and design rules to prevent field failures.

Prevent CAF →

HDI Feasibility Review

Submit your proposed HDI stackup for an engineering assessment. We check microvia aspect ratios, resin fill requirements, and IPC‑6018 compliance.

Request Review →

Need help selecting the right HDI structure or validating your microvia design?

Talk to Our Engineering Team →

Get Custom Quote

PRODUCTS CENTER

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit