How to Specify IPC‑6012 in PCB Procurement

How to Specify IPC‑6012 in PCB Procurement

Quality & Inspection Standards

PRODUCTS CENTER

Get Custom Quote

PRODUCTS CENTER

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit

How to Specify IPC‑6012 in PCB Procurement

A well‑written purchase order is the difference between getting the board you need and receiving a board that meets the minimum industry default. IPC‑6012 provides a precise language for specifying the quality and reliability level of rigid PCBs. This guide walks you through exactly what to include in your procurement documents so your supplier delivers exactly what your application demands.

Why Detailed Specification Matters

If you simply write “PCB to IPC‑6012” on a purchase order, the supplier will apply the default requirements from IPC‑6012E Table 1‑2. These defaults may not match your actual needs: they assume Class 2 performance, epoxy glass laminate, 1 oz starting copper, and Sn63/Pb37 solder coating. If your board is for an aerospace application requiring Class 3, high‑frequency laminate, and ENIG surface finish, you will receive a board that is technically compliant but functionally unsuitable. Specifying correctly prevents this gap.

1. Define the Performance Class

The most fundamental decision: Class 1, Class 2, or Class 3 (IPC‑6012E §1.3.1). This single choice cascades into plating thickness, annular ring, void limits, and inspection sampling. Write it explicitly:

Performance Class: IPC‑6012 Class 3

If not specified, Class 2 is the default (Table 1‑2).

2. Identify the Board Type

IPC‑6012 defines six board types (§1.3.2). Choose the one that matches your design:

  • Type 1 – Single‑sided
  • Type 2 – Double‑sided
  • Type 3 – Multilayer (no blind/buried vias)
  • Type 4 – Multilayer with blind/buried vias (may include microvias)
  • Type 5 – Multilayer metal core (no blind/buried vias)
  • Type 6 – Multilayer metal core with blind/buried vias

3. Specify Base Materials

Unless you specify otherwise, the default is epoxy glass fabric laminate (IPC‑6012E §3.2.1). For high‑frequency, high‑speed, or high‑temperature applications, call out the exact material specification:

  • PTFE materials per IPC‑4103
  • High‑speed laminates (e.g. Megtron 6, Rogers 4350B) per IPC‑4101
  • Copper foil type per IPC‑4562: specify weight (oz), grade, and profile
  • If metal core: define alloy per Table 3‑1
Base laminate: IPC‑4103, PTFE woven glass, Dk 3.0 @ 10 GHz
Copper foil: IPC‑4562, ½ oz, reverse‑treat, profile Rz ≤ 5 µm

4. Define Plating Process and Surface Finish

IPC‑6012 uses numeric codes for the copper plating process (§1.3.4.2) and alphabetic codes for the surface finish (§1.3.4.3, Table 3‑3). Include these explicitly:

Parameter Code Meaning
Copper plating 3 Acid and/or pyrophosphate copper
Surface finish ENIG Electroless nickel / immersion gold per IPC‑4552

If surface finish thickness is critical, specify it (Table 3‑3). The default requirement is “coverage and solderability”.

5. Select the Thermal Stress Test Method

Your purchase order must specify which thermal stress test the manufacturer should use (IPC‑6012E §1.3.3). Choose the method that best represents your assembly process:

  • Method 2.6.8 (Condition A) – Solder float, for wave‑solder or hand‑solder assembly
  • Method 2.6.27 (230 °C) – Convection reflow, traditional SnPb process
  • Method 2.6.27 (260 °C) – Convection reflow, lead‑free process

If not specified, the default is Method 2.6.8 Condition A (Table 1‑2).

6. Override Default Requirements (Where Needed)

Table 1‑2 gives the defaults for every technical requirement. Review this table carefully and explicitly override any parameter that doesn’t suit your design. Common overrides:

  • Hole size tolerance: Default ±100 µm for component holes; ±80 µm for via‑only.
  • Minimum dielectric spacing: Default 90 µm. For high‑speed designs with thin dielectrics you may need to specify 75 µm or 50 µm with supplier agreement.
  • Conductor width/spacing: Default Class 2 tolerance. For impedance‑controlled lines, specify tighter tolerances.
  • Solder mask: Default is no mask unless specified; if required, call out IPC‑SM‑840 Class T (Class 2) or Class H (Class 3).
  • Solderability test: Default SnPb is Class 2 durability; lead‑free is Class A. Specify which and, if needed, require accelerated aging.

7. Include Special Requirements (If Applicable)

IPC‑6012 §3.10 lists optional special requirements. Add these only if your application demands them; each adds cost and lead time. Common additions:

  • Impedance testing (TDR) – §3.10.5
  • Thermal shock (air‑to‑air cycling) – §3.10.7
  • Ionic cleanliness (ROSE or IC) – §3.9
  • Microvia reliability (performance‑based testing) – §3.10.15
  • Vibration / mechanical shock – §3.10.3, §3.10.4

The Classification System (Optional but Recommended)

IPC‑6012 §1.3.3.2 provides a shorthand notation that captures all your choices in one line. While optional, it drastically reduces ambiguity. The format is:

IPC‑6011/6012/board‑type/plating‑code/surface‑finish/selective‑finish/class/technology‑add‑ons

Example: a Class 3, Type 4 board with ENIG finish and HDI structures would be:

IPC‑6011/6012/4/3/ENIG/‑/3/HDI

Checklist: What Your Purchase Order Must Contain

  1. Applicable master drawing – name, number, revision, date (IPC‑6012E §5.1a)
  2. Performance class – 1, 2, or 3 (§1.3.1)
  3. Board type – 1 through 6 (§1.3.2)
  4. Base material – laminate specification, copper foil weight and type (§3.2.1, §3.2.4)
  5. Plating process code (§1.3.4.2)
  6. Surface finish – code from Table 3‑3 with thickness if critical (§1.3.4.3)
  7. Thermal stress test method (§1.3.3)
  8. Any overrides of Table 1‑2 defaults
  9. Special requirements (§3.10) if any
  10. Packaging, handling, and delivery info (§5.1d)

Common Mistakes to Avoid

  • Relying on defaults without review – they may not match your application.
  • Forgetting to specify the thermal stress method – the wrong method can mask defects that your actual assembly would reveal.
  • Omitting thickness for ENIG or other finishes – “coverage and solderability” may not be enough for wire‑bonding or high‑cycle connectors.
  • Not specifying impedance test requirements – impedance is not tested unless requested.
  • Mixing classes within one board – if some features need Class 3, the entire board should be procured as Class 3, with specific exceptions documented as AABUS.

Need a custom procurement template or help reviewing your purchase specification?

Request Procurement Support →

References: IPC‑6012E (2020), Sections 1.3.1, 1.3.2, 1.3.3, 1.3.4, 3.2, 3.10, 5.1; Tables 1‑2, 3‑3. Courtesy of IPC.

Get Custom Quote

PRODUCTS CENTER

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit