PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

PCB Manufacturing FAQ

What is the role of X-ray inspection in rigid PCB testing?

Detect via connectivity, voids, copper integrity in multilayer boards. Check BGA solder joints and internal defects (foreign matter, delamination) non-destructively.

How to test the electrical performance of rigid PCBs?

Use flying probe testers or ICT equipment. Flying probe suits small batches/varieties, detecting opens/shorts, etc. ICT is for mass production, fully testing electrical performance with special fixtures.

What inspections are required during rigid PCB manufacturing?

Inspect dimensions/thickness after cutting. Check hole position, size, and wall after drilling. Test copper thickness/uniformity after plating. Inspect circuit integrity after etching. Check printing quality of solder mask/characters. Test coating thickness/adhesion after surface finishing. Inspect shape/edges after molding.

What are the molding processes? How to choose?

Mechanical cutting (high precision, suitable for complex large sizes). Punching (high efficiency, suitable for regular mass production). Laser cutting (extremely high precision, high cost, suitable for fine small batches). Choose based on shape, precision, batch size, and cost.

What are the common surface finishing methods for rigid PCBs? What are their characteristics?

HASL: Low cost, good solderability, limited flatness. ENIG: Smooth, good solderability and corrosion resistance, high cost. Immersion tin: Good solderability, smooth surface, shelf life. OSP: Low cost, simple process, short solderability retention.

What are the precautions for character printing?

Characters should be clear, complete, with good color contrast, accurately positioned without blocking key areas, and have strong adhesion (select suitable inks and curing processes).

What are the quality requirements for solder mask printing?

Uniformly cover the circuit without missing printing, pinholes, or bubbles. Oil thickness on copper surface: 10-18μm, via: 5-8μm. Appropriate spacing from circuit edges to prevent excessive pad coverage or short-circuit risks.

How to ensure etching accuracy during the etching process?

Control etchant concentration, temperature, time, and spray pressure, and maintain equipment regularly. High concentration may cause over-etching, while low concentration leads to incomplete etching. Keep temperature at 45-55℃, determine time based on board thickness, etc., and ensure uniform pressure for full contact.

How to control copper thickness in plating?

Control via current density, plating time, and solution concentration. E.g., 1oz (35μm) requires 20-30 minutes at 2-3A/dm².

What are the imaging methods and their pros/cons?

Photolithography: High precision for HDI, high cost and complex. Screen printing: Low cost/simple equipment, lower precision.

What is the role of copper deposition and key controls?

Role: Conductivize hole walls for layer connection. Controls: Solution composition, temperature (25-35°C), pH (11-12), pretreatment cleanliness.

What are common drilling issues and solutions?

Issues: Rough walls, burrs, broken drills. Solutions: Replace drills, optimize speed/feed, inspect materials.

< 1234...99 >

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit