PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

IC Programming FAQ

What to do if "IC model not supported" is prompted?

Confirm correct model input, check programmer support list, and contact manufacturers for updates

How to automate IC programming testing?

Integrate programmers into ATE systems, control programming via scripts, and automatically test functionality/performance.

Can programmed IC programs be decompiled?

Unencrypted IC programs may be decompiled; encrypted ICs use keys/obfuscation to prevent this, though not completely foolproof.

How to program ICs with multiple storage areas?

Set address ranges per datasheet, erase/program/verify each area separately, or use multi-area programming functions.

Why do IC pins spark during programming?

Excessive voltage, short circuit/poor contact, damaged IC, or electrostatic discharge.

How to determine if a programmer needs calibration?

Calibration is needed when programming failure rate increases, time fluctuates significantly, or functional anomalies rise.

What to do if the programming file is too large to write at once?

Split files for batch writing, use stream programming, optimize/compress files, or use segmented programming.

How to program low-power ICs without affecting their power characteristics?

Use low-power programming mode, minimize pin driving, and power off promptly after programming.

How to solve compatibility issues after programming?

Identify the issue, check parameter settings, compare with working files, and contact manufacturers if needed.

How to prevent data loss during programming?

Use stable power (e.g., UPS), backup files, avoid interference, and maintain equipment regularly.

What factors affect programmer speed?

Hardware performance, programming protocol, IC storage capacity, programming mode, and software algorithm optimization.

Do programming effects vary for the same IC model in different batches?

Minor differences in programming time/voltage margin may exist due to process variations, generally within tolerance.

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit