PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
Solder Materials Management FAQ
What is the impact of using different types of rework solder on product reliability during PCBA rework?
Impacts: - Same-composition solder: Consistent joint performance, reliability similar to original; - Different-composition solder (e.g., bismuth-based low-temperature solder): Large CTE mismatch (bismuth-based ≈2x SAC305), prone to cracking in thermal cycles, reliability reduced by 50%+.
How to optimize procurement plans using big data analysis in solder material management?
Methods: 1. Analyze historical consumption, procurement cycles, and price fluctuations to predict demand; 2. Pre-stock based on seasonal orders to reduce stockout risks; 3. Track price trends to optimize purchasing timing. Data shows 15%-20% inventory cost and 8%-12% procurement cost reduction.
How to determine whether to replace the solder bath during regular wave soldering tank maintenance?
Replacement criteria: 1. Impurities exceed standard (e.g., Cu >0.8%, IPC-J-STD-006B), solder joint strength decreases by 20%-30%; 2. Solder dross covers >20% of the bath surface, affecting quality; 3. Welding defect rate continuously increases due to solder bath issues.
How to evaluate the impact of solder storage environment on its shelf life?
Key factors: '- Shelf life shortens by 20% for every 5℃ over standard (e.g., paste >10℃); - Oxidation rate increases by 15% for every 10%RH humidity rise; Analyze data correlation via temperature/humidity recorders to predict actual shelf life.
How to select suitable solder materials for verification during PCBA small-batch trial production?
Strategies: 1. Prioritize the same solder model as mass production to ensure process continuity; 2. For complex products, select 2-3 brands with similar performance for comparison; 3. Evaluate via defect rate, solder joint tensile force data, and comprehensive cost.
How to troubleshoot causes from the solder material perspective when 大面积虚焊 (extensive insufficient soldering) occurs after PCBA welding?
Troubleshooting points: 1. Check if solder paste metal content ≥90% (lead-free standard), deficiency increases insufficient soldering risk by 40%+; 2. Verify flux activity meets RA grade, insufficient activity causes poor wettability; 3. Confirm if solder paste is expired (viscosity/activity degradation).
How to quantitatively evaluate the efficiency of solder management processes?
Indicators: Inventory turnover (excellent level 8-10 times/year), time from pickup to line (≤1 hour), downtime ratio due to management issues (<0.5%), data-driven improvement.
How do different types of solder paste squeegees affect printing quality?
Polyurethane squeegee: Flexible, suitable for low-viscosity and fine pitch (pins <0.4mm, defect rate <3%);Metal squeegee: High hardness, suitable for high-viscosity and thick films (pads >0.8mm, thickness tolerance ±5μm).
How to manage solder batch information through a quality traceability system?
System records: Batch number, production date, composition, warehousing time, etc., linked to PCBA unique identifiers. Problem location time reduced from 24 to ≤2 hours.
What key technical parameters should be included in the technical agreement with solder suppliers?
Includes: Alloy composition (e.g., SAC305 tolerance Sn±0.5%, Ag±0.2%, Cu±0.1%), melting point (217℃±3℃), viscosity (50-150Pa·s±10%), activity level (e.g., RA grade halide ≤0.5%), environmental requirements (RoHS 2.0), etc.
How to determine the quality deposit ratio for solder suppliers?
Ratio: 5%-10% of annual procurement amount. Deduct for batch defect rate >3%, return after 3 consecutive 合格 batches to incentivize quality control.
How to evaluate a supplier's R&D capability through on-site audits?
Evaluation indicators: R&D equipment (DSC, SEM availability), R&D personnel ratio (≥15%), patent count (≥3 new annually), new product development cycle (average ≤6 months).
Get Custom Quote
PRODUCTS CENTER


