PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
Copper PCB FAQ
What is the processing cost analysis of blind and buried vias in the design of thick copper PCBs?
The cost of blind and buried vias is 30%-50% higher than that of through holes, and the cost increase is more significant in the case of thick copper.
What is the impact of the copper foil surface treatment on the insertion and extraction life of thick copper PCBs?
Hard gold plating has an insertion and extraction life of >1000 times, and the immersion gold process is about 50-100 times.
What are the weather resistance requirements for the solder resist ink in thick copper PCBs?
After UV aging test (500 hours), there is no discoloration or chalking.
What is the impact of the roughness of the drilled hole walls on electroplating in thick copper PCBs?
High roughness will cause uneven electroplating and increase the thickness difference of the hole copper.
What is the detection method for the internal stress of the electroplated copper layer in thick copper PCBs?
X-ray diffraction method or stress ring test is used to quantify the internal stress value.
What are the design principles for the power via array in the design of thick copper PCBs?
The via spacing ≥20mil, the number is calculated according to the current-carrying demand, and they are symmetrically distributed.
How to repair poor solder resist ink printing on thick copper PCBs?
Local defects can be manually reprinted, and large-area defects need to be reprinted and cured.
What is the impact of the residual stress of copper foil on the reliability of thick copper PCBs?
Residual stress will cause copper foil deformation and cracking, reducing long-term reliability.
What are the measures to suppress signal crosstalk in thick copper PCBs?
Increase the trace spacing (≥3W rule), insert ground shield lines, and optimize the routing layer allocation.
What is the impact of the milling cutter speed on the processing quality of thick copper PCBs?
Too high a speed is prone to produce burrs, and too low a speed affects efficiency, which needs to be adjusted according to the copper foil thickness.
What is the detection method for the porosity of the electroplated copper layer in thick copper PCBs?
Gas permeation method or metallographic microscope observation is used to calculate the number of pores per unit area.
What is the filling method for heat dissipation vias in the design of thick copper PCBs?
Resin plugging + surface electroplating can be used, or solder paste filling and then curing.
Get Custom Quote
PRODUCTS CENTER


