PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

AOI Inspection FAQ

How can FCT testing data be used for production process optimization?

Through the statistical analysis of FCT testing data, the distribution patterns and high - frequency problem points of product functional defects can be discovered. For example, if a certain type of functional defect occurs frequently, the corresponding production processes (such as component placement, soldering, software burning) can be thoroughly investigated. Analyze the correlation between defects and factors such as raw material batches, production equipment, and operators, and improve process parameters, strengthen quality control, and optimize product design accordingly, thereby improving the overall product quality and production efficiency.

Where is the best installation position of FCT testing in the PCB placement production line?

FCT testing is generally set at the end of the production line, that is, after processes such as ICT testing and appearance inspection are completed, to ensure that the products screened by the previous processes are verified for functions in a state close to actual use, and to prevent unqualified products from flowing to the client. According to the product characteristics, phased FCT testing can also be set after the assembly of key functional modules to detect problems in a timely manner and reduce the waste of subsequent processes.

Can FCT devices adapt to the testing of PCBs of different sizes and types?

Dedicated FCT devices based on fixtures are usually designed for specific products and have poor adaptability to PCBs of different sizes and types. The fixtures need to be redesigned. Universal FCT devices based on instruments can adapt to the testing of PCBs of different sizes and types to a certain extent through software programming and replacing the appropriate test interfaces, but for products with special functions or structures, some test modules may still need to be customized.

How to solve the problem of false positives in FCT testing?

Re - review and adjust the test parameters, and optimize the threshold through multiple tests. Carefully check and correct the logic of the test program and conduct sufficient test verification. Regularly maintain and calibrate the testing equipment to ensure stable performance. Check and improve the contact condition of the test fixture, and replace the fixture if necessary. Shield or optimize the test environment to reduce interference. Communicate with the R & D department to confirm the compatibility of the product design in the test environment and solve potential problems.

What are the reasons for false positives in FCT testing?

Reasons include unreasonable setting of test parameters (too wide or too narrow threshold range), logical errors in the test program (inaccurate judgment conditions), performance fluctuations of the testing equipment itself (unstable signal output), poor contact of the test fixture (resulting in abnormal signal transmission), environmental interference (electromagnetic interference affecting signal collection), and compatibility problems in product design (abnormal performance in the test environment).

What are the main functions of FCT testing software?

The main functions of FCT testing software include test program writing and editing (defining the test process, setting parameters, writing logical judgment statements), test execution control (starting, pausing, stopping the test), real - time data collection and display (displaying input and output signal waveforms and values), automatic defect recognition and alarm (marking faults and prompting according to the judgment criteria), test result recording and report generation (counting the pass rate, recording defect information), data analysis and traceability (analyzing the trend of test data, tracing the product test history).

What are the advantages and disadvantages of FCT testing compared with AOI, X - ray, and ICT testing?

The advantage is that it can detect problems from the actual functional level of the product, which is closer to the user's usage scenario, and can identify logical and performance defects that cannot be detected by other tests. The disadvantages are higher testing costs (equipment and fixture costs), complex test program development, and relatively slow testing speed. AOI mainly detects appearance and surface defects, with fast speed and low cost. X - ray inspection can detect hidden internal defects. ICT focuses on the detection of electrical parameters of circuits and can accurately locate faulty components, but none of the three can directly verify the product functions.

What does the maintenance of FCT devices include?

Daily maintenance includes cleaning the surface of the equipment and test fixtures to prevent dust and impurities from affecting the test. Regularly check the operation status of each module of the equipment (such as the power module and signal generation module) and monitor key performance indicators. Check and calibrate the test fixtures to ensure good contact. Update the test software in a timely manner to fix bugs and add new functions. Perform regular comprehensive calibrations and in - depth maintenance according to the requirements of the equipment manufacturer.

How to improve the accuracy of FCT testing?

Regularly calibrate the testing equipment to ensure the accuracy of input and output signals. Optimize the test program and accurately set the test parameters and judgment criteria. Adopt multiple testing methods and means (such as boundary condition testing and limit testing) to comprehensively detect product functions. Provide professional training for operators to improve their fault analysis and judgment abilities. Establish a complete test data recording and analysis mechanism, and discover potential problems through the comparison of historical data.

How to handle it when FCT detects defects?

When FCT detects defects, the testing equipment will record the defect information and issue an alarm prompt. Operators need to mark the defective products according to the prompts and use professional instruments (such as oscilloscopes and logic analyzers) to further analyze the causes of the failures. For repairable problems (such as program errors and component cold soldering), repair them and retest. For products that cannot be repaired, handle them according to the scrapping process, and feedback the defect data to the production and R & D departments to improve the process and optimize the design.

What are the common PCB placement defects that FCT can detect?

FCT can detect logical function errors (such as abnormal logic control of chips), abnormal signal transmission (signal attenuation, distortion, interference), interface function failures (USB, network interface, etc. unable to communicate normally), power management problems (unstable voltage output, abnormal over - current protection), software function defects (program operation errors, response timeout), etc. These defects may be caused by incorrect component placement, poor soldering, component damage, or design problems.

How to set the test parameters of FCT?

Test parameters include the type (analog signal, digital signal), amplitude, frequency, and duty cycle of the input signal; test time; judgment criteria for output signals (such as voltage range, logic level, waveform characteristics); the sequence and conditions of test process steps, etc. According to the product functional specification and actual working requirements, combined with the performance of the testing equipment, the parameters need to be set reasonably through debugging and verification to ensure the effectiveness and accuracy of the test.

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit