PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

PCBA Rework FAQ

What are the integration points between PCBA rework process and Industry 4.0?

Realize digital control and remote monitoring of rework equipment, optimize processes through big data analysis, and establish product rework traceability systems to improve quality control.

What is the impact of 3D printing technology on PCBA rework?

It can quickly manufacture fixtures for rework to reduce costs, and is used to repair local damage of PCB (such as printing conductive lines) to simplify complex processes.

What is the development direction of green rework technology?

Promote environment-friendly flux and cleaning agents, develop low-energy consumption equipment, and explore non-destructive rework technology to reduce pollution and resource waste.

What is the future development trend of automated rework equipment?

It will develop towards high-precision and multi-function integration (such as integrating X-ray inspection, automatic ball planting, welding, etc.), and realize interconnection with MES system to improve intelligent management.

What are the applications of artificial intelligence in PCBA rework process?

Analyze rework data through machine learning to predict defects, use visual recognition to automatically locate defective components, and intelligently adjust equipment parameters to improve efficiency and quality.

What to do if signal interference occurs in PCBA after rework?

Check whether the grounding is good and the shielding cover is installed in place, check whether the signal line is damaged during welding, use a spectrum analyzer to detect the interference source, and take measures such as shielding and filtering.

How to troubleshoot short circuits during PCBA rework?

Use a multimeter for continuity testing to locate the short circuit point, and check and solve problems such as solder residue bridging, component pin misalignment, and PCB circuit damage.

How to rework rare package components (such as Flip-Chip)?

Special equipment (such as flip chip rework station) is required, and laser heating or ultrasonic welding technology is used. Parameters are determined through pre-testing, and the success rate is usually 60%-70%.

When there are multiple defective components on PCBA, how to determine the rework order?

Priority is given to removing large-size and high-heat-generating components to avoid affecting the repaired parts; follow the principle from easy to difficult to reduce risks.

How to rework encapsulated PCBA?

First use chemical solvents (such as acetone) to dissolve the encapsulation material, rework according to the conventional process after removal, and re-encapsulate after completion, paying attention to the fluidity and curing conditions of the material.

What are the maintenance points of the rework microscope?

Regularly clean the lens with special lens paper, avoid collision to prevent the displacement of optical components, and calibrate the focal length every year to ensure clear imaging.

How often should the heating elements of the infrared rework station be replaced?

Generally, it is replaced every 1-2 years according to the usage frequency. After aging, the temperature uniformity decreases, and the welding defect rate increases by about 12%.

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit