PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

PCB Manufacturing FAQ

What international testing standards do you follow?

Our testing processes comply with IPC, ISO, MIL, and IEC standards. All procedures are executed under certified quality systems to ensure repeatability and global acceptance.

Do you offer custom test development for special applications?

Absolutely. Our engineering team can design customized test fixtures, software, and automation scripts based on your test specifications, communication protocols, and performance criteria.

How can I choose the right testing strategy for my project?

The best approach depends on your production stage, complexity, and reliability requirements. For example: 1.Prototype: Flying Probe + AOI + Functional Test; 2.Mass Production: ICT + AOI + Burn-in; 3.High-Reliability Systems: FCT + Environmental + Thermal Cycling.

What surface finish is used and why?

ENIG is specified for stable solderability and consistent surface performance.

How do you verify the electrical quality?

100% continuity testing plus impedance verification for controlled-impedance structures (report available).

What files do you need to quote and validate impedance?

Gerber/ODB++, stack-up intent (target impedance, reference plane), and any controlled-impedance constraints (line width/spacing rules).

Why resin-filled vias on an RF board?

Resin filling improves planarization and reduces solder-related defects in assembly, especially where flatness matters.

What impedance tolerance can you support for this build?

Target-dependent control within ±10% with impedance verification available.

What is “open-window impedance” and why use it?

It’s a geometry approach that tunes trace width/spacing to hit impedance targets more reliably under real fabrication tolerances.

What do you need from us to start?

Gerbers, stack-up intent (or target impedance), impedance table (if available), and any critical assembly constraints (pad spacing, mask rules, finish).

What is the typical manufacturability risk on tight RF designs?

The biggest risks are etching bias (trace/gap drift), solder mask variation, and minimum dam formation—solved by coordinated geometry rules + DFM validation.

What surface finish is recommended for RF boards?

This product uses ENIG for robust solderability and long-term contact performance; alternatives can be evaluated per application requirements.

< 1...567...187 >

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit