PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

PCB Manufacturing FAQ

What via process is used and why?

Resin plugged vias help improve reliability and assembly stability by reducing voiding risk and controlling surface behavior during soldering.

Does solder mask affect impedance?

Yes. Solder mask coverage/thickness changes effective dielectric and can shift impedance—DFM rules may include mask control or local openings.

What is CPWG and why does it matter?

CPWG (grounded coplanar waveguide) improves return-path control and reduces sensitivity to external coupling, helping impedance stay stable under real manufacturing variation.

Why RO4350B + RO4450F instead of standard FR-4?

Rogers laminates provide more stable dielectric behavior at RF frequencies, improving impedance predictability and lowering loss in RF routing.

What if impedance results are out of spec?

We initiate root-cause analysis, provide a report, and propose corrective actions (trace tuning/lamination adjustment) at our cost.

What documentation do you provide with each order?

Manufacturing traveler, impedance test report, electrical test report, and certificate of compliance (plus optional cross-section/SPC).

Are there additional costs for resin-filled vias and impedance control?

These are value-added processes; we clarify costs during DFM and provide transparent quotation breakdown.

How do you handle non-standard impedance structures (e.g., partial soldermask opening CPW)?

We use 3D EM simulation to model the structure and provide tolerance/design feedback before fabrication.

Can you provide impedance testing and reports for each batch?

Yes—impedance coupon testing is performed and reports are provided, including TDR waveforms.

What is the typical lead time for Rogers 4350B prototypes?

Prototype lead time is typically 7–12 working days (volume depends on complexity).

Do you support resin-filled vias for all via sizes on this 6-layer Rogers PCB?

Yes—resin filling is supported for microvias and through-holes up to 0.5 mm diameter.

What impedance tolerance can you achieve for high-frequency RF boards?

We guarantee ±10%, and can reach ±8% under optimized design conditions.

< 1...678...187 >

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit