PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
PCB Manufacturing FAQ
What is the salt spray test standard for flexible boards?
ASTM B117; no corrosion after 24 hours
Can flexible boards perform 3D stereoscopic bending?
Yes, but step-by-step forming required; each bending angle≤90°
What is the electroless copper plating thickness for flexible boards?
Through-hole copper plating thickness≥25μm
What are the influencing factors of flexible PCB flex life?
Substrate type, copper foil thickness, bending radius, ambient temperature
How to solve signal delay issues in flexible boards?
Control trace length; use differential pair design
What is the bonding tolerance of flexible boards?
Interlayer registration accuracy≤50μm
What is the maximum coefficient of thermal expansion for flexible boards?
Polyimide: X/Y axis≈15ppm/℃, Z axis≈70ppm/℃
How to measure the impedance of flexible boards?
Network analyzer; characteristic impedance control accuracy±5Ω
What is the minimum character height for flexible PCB?
Conventional: 0.15mm; fine process: 0.1mm
Can flexible boards be double-sided assembled?
Yes, with attention to reinforcement design and soldering sequence
What is the flame retardant rating of flexible boards?
Polyimide: UL94 V-0; PET: UL94 HB
How to prevent flexible board fracture at bending points?
Arc transition design; copper foil etching with 0.05mm margin
Get Custom Quote
PRODUCTS CENTER


