PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
PCB Manufacturing FAQ
What is the lamination time control for flexible boards?
Polyimide lamination time: 30-60 minutes
What are the moisture-proof treatment methods for flexible boards?
Vacuum packaging + desiccant; humidity indicator card<10%
What is the maximum assembly density of flexible PCB?
Can achieve 0201 component placement; minimum spacing 0.3mm
How to design the folding area of flexible boards?
Hollow grid design; retain 20% substrate support
What is the dynamic bending test speed for flexible boards?
Conventional: 5-10 cycles per minute
What is the solderability test standard for flexible boards?
JIS Z3198; wetting time<3s
What is the surface roughness requirement for flexible PCB?
Ra≤1.5μm (ENIG surface)
How to prevent blistering during flexible board soldering?
Preheating temperature 80-120℃; soldering time<3s
What is the minimum curling radius limit of flexible boards?
Polyimide minimum curling radius: R=1mm (0.1mm thickness)
What is the withstand voltage of flexible boards?
Conventional insulation withstand voltage≥500V; special design up to 1500V
How to improve the heat dissipation performance of flexible boards?
Add thermally conductive copper foil layer; thermal conductivity up to 150W/mK
What is the minimum pad size for flexible PCB?
0.3mm (0.1mm via), 0.5mm (0.3mm via)
Get Custom Quote
PRODUCTS CENTER


