PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
PCB Manufacturing FAQ
What is the minimum bending radius test standard for flexible PCBs?
IPC-6013, no cracking after 1000 cycles of bending
How to design the connection area of flexible boards?
Adopt rigid-flex combination design, connection area length ≥5mm
What is the surface treatment friction resistance of flexible boards?
ENIG surface friction resistance ≥500 times (CS-10 wheel, 1000g pressure)
What is the damp heat resistance of flexible boards?
No failure after 1000 hours in 85℃/85% RH environment
What is the copper foil peel test method for flexible boards?
IPC-TM-650 2.4.8 standard, 90° peel test
What is the minimum hole diameter processing method for flexible PCBs?
Laser drilling (minimum 0.1mm), plasma etching
What is the maximum pressing pressure for flexible boards?
Lamination pressure is 4-6MPa (polyimide substrate)
How to test the insulation resistance of flexible boards?
500V megohmmeter; resistance≥10¹²Ω
Does the dielectric constant of flexible boards change with frequency?
Polyimide: εr=3.5 at 1GHz, εr=3.2 at 10GHz
What are the curing conditions for flexible board solder mask ink?
150℃ for 60 minutes or 180℃ for 30 minutes
What is the minimum line width design limit for flexible PCB?
Theoretical limit: 10μm (laser direct imaging technology required)
What is the flex fatigue test cycle for flexible boards?
1,000,000 cycles; performance inspection every 100,000 cycles
Get Custom Quote
PRODUCTS CENTER


