PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

PCB Manufacturing FAQ

What is the maximum mechanical stress bearing capacity of flexible PCB?

Tensile strength: polyimide≥150MPa, PET≥100MPa

What is the dielectric loss tangent of flexible boards?

Polyimide: tanδ≈0.003; PET: tanδ≈0.01

How to achieve EMI shielding for flexible boards?

Copper/nickel plating shielding layer; shielding effectiveness>60dB

Can flexible boards be used with wave soldering?

Not recommended; reflow soldering or selective wave soldering is suggested

What is the peel strength standard for flexible boards?

IPC standard: ≥1.5N/mm (18μm copper foil)

What is the minimum via size for flexible PCB?

Conventional: 0.3mm; advanced process: 0.1mm

How to solve flexible board warpage issues?

Add balance layer design; lamination pressure: 3-5MPa

What are the storage conditions for flexible boards?

Humidity<60%, temperature 20-25℃, shelf life 6-12 months

How to choose between polyimide and polyester?

Polyimide for high-temperature and high-bending requirements; polyester for cost-sensitive applications

Can flexible boards be processed with blind/buried vias?

Yes; minimum blind via diameter: 0.15mm, aspect ratio≤3:1

What is the thickness of the solder mask for flexible PCB?

Conventional: 15-30μm; special requirements: up to 50μm

How to design the reinforcement area of flexible boards?

Reinforcement thickness: 1.5-2×flexible board thickness; rounded edges required

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit