PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

PCBA Basics & Overview

What pre-treatments are needed before PCB assembly?

Cleaning to remove impurities; OSP-treated PCBs need baking to remove moisture and prevent soldering bubbles.

How to inspect PCB quality?

Visual inspection (scratches, deformation), flying probe/ICT testing (connectivity), metallographic analysis (internal structure/plating).

How does PCB surface finish affect assembly?

Hot air solder leveling (HASL): low cost but poor flatness, affecting fine-pitch soldering; Electroless nickel immersion gold (ENIG): good solderability, high precision, high cost; Organic solderability preservative (OSP): protects copper, moderate cost, strict storage requirements.

Why is pad design important for assembly?

Pad size, shape, and spacing directly affect soldering quality. Too small pads cause dry joints; too close spacing leads to bridging short circuits.

What are the assembly limitations of PCB size?

Over-sized PCBs exceed equipment limits; under-sized ones cause handling/soldering difficulties, affecting component layout and heat dissipation.

How to choose PCB layer count and its impact?

Choose based on circuit complexity: double-layer for simple circuits, multi-layer for complex ones. More layers provide more routing space but higher costs, with stricter requirements for layer alignment.

How does PCB material affect assembly?

Common materials like FR-4 (good electrical/mechanical properties for general products) and CEM-1 (lower cost but inferior performance). Thermal expansion coefficient affects solder joint reliability; large differences may cause stress issues.

What are the differences in PCB assembly requirements for different electronic products?

Consumer electronics: low cost, high density, miniaturization; Industrial control: stability, anti-interference; Medical devices: high precision and reliability, requiring strict compliance with standards.

What factors affect PCB assembly costs?

Influenced by component costs, PCB layer count/size/process complexity, assembly difficulty, production volume, testing requirements, etc. Larger batches reduce unit costs, while complex processes increase costs.

When is hybrid technology used?

Hybrid technology is used when products need to leverage both THT's high power/mechanical strength and SMT's high density/small size, such as power modules with both through-hole inductors and surface-mount chips.

What is SMT technology and its advantages?

SMT is Surface Mount Technology, with advantages of high assembly density, small component size, suitability for automated production, high efficiency, and low cost.

What is THT technology and its characteristics?

THT is Through-Hole Technology, where components with leads are inserted into holes for soldering. Advantages: high mechanical strength, suitable for high-current components; Disadvantages: large space occupation, low efficiency.

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit