PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
PCBA Basics & Overview
How does soldering iron tip temperature affect quality?
Lead-free soldering: 350-380℃ tip temperature, ≤3s contact time. Excessive heat causes pad lifting or lead oxidation.
How to match wave soldering temperature and conveyor speed?
At 245-255℃ solder pot temperature, speed 1.2-1.8m/min; thick copper PCBs require 1m/min for via filling.
How does flux solid content affect soldering?
No-clean flux: solid content<5%; high-solid flux (>10%) improves wettability but increases residue risk, requiring compatible cleaning.
How to adjust wave height in wave soldering?
Double-wave soldering: Turbulent wave submerges 1/3-1/2 PCB thickness; smooth wave height 0.5-1mm below PCB bottom.
What is the acceptance standard for BGA voiding?
IPC-A-610 Class 3: Void area ≤10% of solder ball area; critical applications (e.g., automotive) require ≤5%.
What are the advantages and costs of nitrogen reflow soldering?
Nitrogen (O₂<500ppm) reduces oxidation and improves wettability, but adds 15-20% to process costs, suitable for high-reliability applications.
What are the typical temperature zone parameters for lead-free reflow soldering?
Preheat (150-180℃): 1-2℃/s ramp; soak (180-210℃): 60-90s; reflow peak 245-255℃, ≥217℃ for 60-90s; cool 2-4℃/s.
How to avoid component tombstoning during placement?
Optimize placement accuracy (±0.05mm), ensure symmetrical solder paste volume, reflow ramp rate ≤3℃/s to minimize temperature gradient.
How does placement pressure affect components?
MLCC placement pressure: 0.3-0.5N (risk of cracking at higher pressures); QFP leads: 0.8-1.2N for coplanarity.
How is the placement accuracy of pick-and-place machines defined?
High-end machines (e.g., Fuji NXT) have Cpk≥1.33, XY repeatability ±25μm, θ accuracy ±0.5°, suitable for 0201 components and 0.3mm pitch BGA.
What is the maximum allowable tolerance for printing offset?
IPC-A-610: Solder paste offset ≤25% of pad width; ≤0.1mm for 0.4mm pitch QFP.
How to select stencil thickness for solder paste printing?
0402 components: 0.12mm stencil; 0.5mm pitch BGA: 0.1mm stencil with 85% pad opening to prevent solder balls.
Get Custom Quote
PRODUCTS CENTER


