PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
Microvia PCB FAQ
How to handle power and ground planes in microvia PCB design?
Realize multi-point connection between power/ground planes through microvias, with a spacing ≤5mm, to reduce the impedance between planes.
What are the fan-out design principles for microvia PCBs?
For BGA fan-out, blind via design is preferred. Each pad corresponds to 1-2 microvias, and the fan-out line width is not less than 40μm.
What signal integrity issues need to be considered in microvia PCB design?
It is necessary to pay attention to the parasitic capacitance of the hole (typical value <0.1pF), inductance (<1nH), and impedance continuity, and control the impedance deviation within ±5Ω.
How to design the stack-up structure of microvia PCBs?
It is recommended to use alternating stacking of core boards and prepregs, with the interlayer dielectric thickness controlled at 50-75μm to ensure signal transmission quality.
What are the design requirements for microvia spacing?
The recommended minimum spacing is ≥80μm to ensure the integrity of the electroless copper plating layer and reduce the risk of short circuits.
What is the aspect ratio limit of microvia PCBs?
Generally, the aspect ratio does not exceed 1:1, and special processes can reach 1:0.8. Too high an aspect ratio is likely to cause poor electroplating filling.
What is the minimum hole diameter for microvia PCB design?
The minimum hole diameter for industrial mass production can reach 50μm, and the laboratory limit is 15μm, but the cost increases exponentially with the decrease of the hole diameter.
What is the historical development of microvia PCBs?
It emerged after the maturity of laser drilling technology in the 1990s. The current mainstream process can achieve a 30μm hole diameter, and the minimum hole diameter record is 15μm.
What are the application fields of microvia PCBs?
Widely used in high-density integration scenarios such as smartphones (accounting for more than 60%), 5G base stations, server motherboards, and AI chip packaging.
What are the types of microvia PCBs?
According to the process, they are divided into blind vias (single-sided conduction), buried vias (internal conduction), and through vias (through the entire board). The common blind via diameter range is 50-100μm.
What is the difference between microvia PCB and ordinary PCB?
The hole diameter is more than 50% smaller than that of ordinary PCBs, the line width/spacing can reach 30μm/30μm, the wiring density is increased by 2-3 times, and it is suitable for high-frequency and high-speed signal transmission.
What is microvia PCB?
A printed circuit board (PCB) manufactured using laser or plasma etching technology with a hole diameter smaller than 0.15mm (the industry typically uses 0.1mm as the standard), used for high-density interconnection.
Get Custom Quote
PRODUCTS CENTER


