PCB & PCBA Frequently Asked Questions

PCB & PCBA Frequently Asked Questions

A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.

Microvia PCB FAQ

What are the requirements for copper foil roughness in microvia PCBs?

It is recommended to use RTF (reverse treatment) copper foil with a roughness Ra <0.5μm to reduce signal transmission loss.

What are the key performance indicators of solder mask ink?

It needs to meet the temperature resistance (no peeling at 260℃/10s), insulation resistance (>10^12Ω), and adhesion (cross-cut test level 0).

How to choose the copper foil thickness?

For the inner layer, 18μm or 35μm copper foil is recommended. For the outer layer, 18μm can be used to reduce signal loss. HDI boards often use 9μm ultra-thin copper foil.

What is the role of prepregs in microvia PCBs?

Used for interlayer bonding, with the glue content controlled at 40-50% and the fluidity at 20-30% to ensure the uniformity of the dielectric after lamination.

What is the impact of different base materials on the performance of microvia PCBs?

High-speed boards have a lower loss tangent (Df <0.005) and are suitable for high-frequency applications; FR-4 has low cost but large signal attenuation.

What are the common base materials for microvia PCBs?

Including FR-4 (dielectric constant 4.2-4.5), high-speed boards (such as Rogers 4350B, Dk=3.66), BT resin, etc.

What is the general yield of microvia PCB manufacturing?

The overall yield under mature processes is about 85-92%. The smaller the hole diameter, the lower the yield. The yield of 50μm microvias is about 80%.

How to improve the hole wall quality of microvia PCBs?

Plasma cleaning is used to remove drilling residues, so that the surface roughness Ra of the hole wall ≤1.0μm.

What are the common defects in microvia PCB manufacturing?

Including rough hole walls (roughness Ra >1.5μm), voids in holes (void ratio >5%), hole deviation (>±30μm), etc.

How to choose the forming process for microvia PCBs?

Laser cutting is used when the shape accuracy requirement is <±0.1mm. For conventional requirements, milling cutters can be used, with a cutter speed of 20,000-30,000rpm.

What are the difficulties in the solder mask process for microvia PCBs?

It is necessary to control the ink viscosity at 80-120Pa・s and use a vacuum plugging process to prevent ink residue in the holes, with a hole blocking rate ≤1%.

What are the surface treatment processes for microvia PCBs?

Common ones include immersion gold (thickness 0.05-0.1μm), OSP (film thickness 0.2-0.5μm), and immersion silver (0.1-0.3μm). Immersion gold has the highest reliability.

Get Custom Quote

PRODUCTS CENTER

+86
  • +86 CN
Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit