PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
PCB Manufacturing FAQ
What does “±0.5mil line tolerance” mean for microwave PCBs?
It means the critical RF trace width is controlled within ±0.0127mm, reducing impedance drift caused by etching variation.
Can impedance or copper thickness be customized?
Yes. Impedance targets, copper thickness distribution, and slot dimensions can be customized based on application requirements.
What reliability level does this PCB meet?
The PCB meets IPC-6012B Class III requirements, suitable for military and industrial environments.
How is impedance verified before shipment?
100% electrical testing is performed, with impedance verification applied to all controlled-impedance structures.
Does this design use HDI microvias?
No. This is a traditional multilayer high-frequency PCB using through-hole architecture for higher mechanical robustness and yield stability.
What is controlled depth slot technology used for?
It enables precise structural integration for industrial automation, with slot depth accuracy controlled within ±0.05 mm.
How many impedance groups can be controlled on this PCB?
Over 20 impedance groups are supported, all maintained within ±5% tolerance through simulation and DFM optimization.
What is yin-yang copper and why is it used?
Yin-yang copper balances copper thickness on both sides of a core, reducing etching difficulty and improving impedance consistency in high-layer designs.
Why use Shengyi S7136H instead of Rogers RO4350B?
S7136H provides comparable DK (≈3.48) and RF loss performance with <5% deviation, while reducing material cost by ~25% and supporting localized supply chains.
What do you need for quoting a controlled-impedance RO4350B PCB?
Gerber/ODB++, target impedance, reference planes, stack-up intent/constraints, board thickness, copper targets, and any special processes (resin fill, gold fingers, etc.).
Are there lower-cost alternatives to RO4350B for similar RF performance?
Other high-frequency materials exist, but RO4350B often provides a strong balance of performance and manufacturability; substitutions may impact Dk stability and RF loss.
Why choose ENIG (Immersion Gold) for high-frequency boards?
ENIG offers stable solderability and consistent surface performance, supporting reliable SMT assembly for RF modules.
Get Custom Quote
PRODUCTS CENTER


