PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
High-Frequency PCB FAQ
What is the minimum design value for line width/spacing of high-frequency PCBs?
In conventional processes, line width/spacing ≥50μm; advanced processes can reach 30μm, requiring impedance control matching.
What is the role of ceramic filler materials in the performance of high-frequency materials?
Adding aluminum oxide ceramics can increase the material Tg to 280℃+ and reduce the coefficient of thermal expansion (CTE) to 2-3ppm/℃, improving high-temperature stability.
How to select PCB materials suitable for millimeter-wave frequency bands?
Prioritize materials with Dk<2.5 and Df<0.001 (such as Arlon AD255, Dk=2.5, Df=0.0008) to meet 24-100GHz applications.
How does the water absorption of materials affect high-frequency PCBs?
Water absorption >0.5% causes Dk fluctuations exceeding 5%. It is recommended to use materials with water absorption <0.1% (such as Rogers 4350B with 0.04% water absorption).
How do different materials affect signal transmission?
Low Dk materials reduce transmission delay (e.g., Dk=2.2 materials have 25% faster delay than FR-4), and low Df reduces signal attenuation (loss is 70% lower than FR-4 when Df=0.001).
What are the common high-frequency PCB materials?
Rogers 4350B (Dk=3.48, Df=0.0037), Taconic TLY-5 (Dk=2.2, Df=0.0009), Isola 370HR (Dk=3.6, Df=0.004).
What factors determine the dielectric loss of high-frequency PCB rigid boards?
Related to material molecular structure, temperature (Df increases by 3%-5% for every 10℃ rise), and frequency (Df increases with the square of frequency).
How is the signal integrity of high-frequency PCBs defined?
Quantitatively evaluated by parameters such as insertion loss (<-3dB@10GHz), return loss (>-20dB@10GHz), and crosstalk (<-30dB).
What are the typical application scenarios for high-frequency PCBs?
5G base stations (24.25-52.6GHz), satellite communications (Ka band 26.5-40GHz), millimeter-wave radar (77GHz), high-speed data centers (100Gbps+).
What are the main differences between high-frequency PCBs and ordinary PCBs?
Uses low-loss materials (such as Rogers 4350B), with line width tolerance ±0.01mm, signal layer spacing control accuracy ±5%, and impedance control accuracy ±5Ω.
What is a high-frequency PCB rigid board?
A printed circuit board for high-speed signal transmission with a working frequency ≥1GHz, requiring materials with low dielectric constant (Dk<3.5) and low dielectric loss (Df<0.005).
Get Custom Quote
PRODUCTS CENTER


