PCB & PCBA Frequently Asked Questions
A centralized engineering knowledge base addressing common questions across PCB manufacturing, PCBA assembly, materials, processes, and reliability-driven design decisions.
FAQ
PRODUCTS CENTER
Get Custom Quote
PRODUCTS CENTER
Back-Drilled PCB FAQ
What are the main factors affecting the cost of back-drilled PCBs?
Main factors include back-drilling accuracy requirements, number of back-drilled holes, board material price, equipment depreciation, etc.
What proportion of the total PCB cost does the back-drilling process account for?
The back-drilling process cost accounts for approximately 15%-30% of the total PCB cost.
What are the cost components of back-drilled PCBs?
Including board material cost, processing cost (including back-drilling process), inspection cost, scrap cost, etc.
Can the back-drilling process be automated?
Yes. Modern CNC drilling machines can achieve automated back-drilling through programming to improve production efficiency and consistency.
What are the consequences of excessive back-drilling feed rate?
Excessive feed rate may cause board tearing, uneven hole walls, back-drilling misalignment, etc.
What is the impact of back-drilling speed on processing quality?
Excessively high speed can cause bit wear and rough hole walls, while too low speed affects processing efficiency. Reasonable matching is required.
Is coolant required during back-drilling?
Yes. Coolant can reduce bit temperature, remove chips, prolong bit life, and improve processing quality.
What is the basis for adjusting back-drilling parameters?
Adjust comprehensively based on factors such as board material type, hole diameter, back-drilling depth, and equipment performance.
What is the processing efficiency of the back-drilling process?
The processing time per hole is approximately 1-3 seconds, depending on the back-drilling depth and equipment performance.
How to control the drilling force during back-drilling?
Control the drilling force within a reasonable range by adjusting feed rate, rotation speed, and bit parameters to avoid board damage.
What is the requirement for back-drilling repeat positioning accuracy?
The repeat positioning accuracy must reach ±0.02mm to ensure back-drilling consistency.
What is the maximum depth of back-drilling?
Limited by equipment and processes, the maximum depth generally does not exceed 5mm, and special processes can reach 8mm.
Get Custom Quote
PRODUCTS CENTER


