Advanced PCB & PCBA Product Center
Explore RF, microwave, high-frequency, high-speed, HDI, rigid-flex, flexible, Rogers, heavy copper and multilayer PCB products, supported by assembly and sourcing from prototype through production.
2–128 Layer PCB Capability
RF, Microwave, High-Speed & HDI
IPC Class 2 & Class 3 Build Support
AOI, Electrical Test & Final Inspection
Explore PCB Products & Services
Showing all results
Showing of results
7.2G FV10000 10W Analog FPV Video Transmitter
6110–7210MHz frequency coverage, 64 channels and up to 10W RF output. IRC Tramp control and 7–36V input for specialized UAV systems.
5.8G 8W MAX FPV Video Transmitter
Up to 8W RF output, 80 channels and SmartAudio control. Active cooling for UAV systems requiring higher transmit power.
5.8GHz 5W FV5000 Analog FPV Video Transmitter
5W RF output, 96 channels and SmartAudio in a 36 × 36mm module. MMCX connectivity and active cooling for compact UAV platforms.
5.8G 10W MAX Adjustable-Power FPV VTX
Selectable 1W/3W/5W/10W output, 80 channels and SmartAudio. Actively cooled for high-power OEM video transmission systems.
5.8G 5W MAX Analog FPV Video Transmitter
Selectable 1W/2W/3W/5W output, 80 channels, SmartAudio and SMA interface. Active cooling for flexible OEM drone integration.
5.8GHz 3W FV3000 Analog FPV Video Transmitter
Compact 36 × 36mm VTX with 3W output, 80 channels and SmartAudio. MMCX interface and active cooling for OEM integration.
5.8GHz 8W FV8000 Analog FPV Video Transmitter
8W RF output, 96 channels and SmartAudio in a compact 36 × 36mm format. SMA interface and active cooling for OEM applications.
5.8G 16W MAX High-Power FPV VTX
16W maximum RF output, 96 channels and 19–28V DC input. Active cooling for high-power UAV system integration.
90A continuous / 100A peak four-motor ESC for 2–8S LiPo systems, with a 56 × 52 mm outline, 8-layer 3oz copper PCB and PWM-to-DShot600 control compatibility.
Featured PCB & PCBA Case Studies
16-Layer Any-Layer HDI PCB
A 16-layer Any-Layer HDI architecture used stacked microvias and fine-line routing to reduce board area by 30% for a compact implantable medical device.
Read Case Study
40% Better Cooling for 800V EV Power Modules with Embedded Copper & Heavy Copper
Overheating threatened reliability. We embedded copper busbars and applied selective heavy copper—transforming the PCB into an active power path, cutting peak temperature by 40% for safe continuous operation.
Read Case Study
24/7 Reliability for Smart City Surveillance with High‑Tg & Blind/Buried Via
Intermittent failures after thermal cycling? We used high‑Tg/low‑CTE materials, blind/buried vias, and thick gold plating—eliminating via fatigue for continuous outdoor operation.
Read Case Study
Copper Inlay & Hybrid Lamination for High‑Power Robotics Thermal Management
A 120A servo drive overheated under continuous load. We embedded copper inlays for direct heat paths and used hybrid lamination to separate power from signal—achieving stable operation without bulky cooling.
Read Case Study
Solving Rigid‑Flex Failure in High‑Vibration Aerospace Systems
Intermittent signal drops and thermal cycling failures traced to rigid‑flex transitions. We smoothed the transition, rebalanced the 14‑layer stack‑up, and tightened process controls—eliminating failure under vibration.
Read Case Study
224Gbps AI Server PCB: From Signal Collapse to Stable Channel
Closed eye diagram and excessive loss at 224Gbps? We redesigned the channel, switched to Megtron 7, and applied sub‑8mil backdrilling—recovering a clean eye diagram and stable transmission.
Read Case Study
PCB Product Selection & Quotation FAQ
What files are needed to quote a microwave PCB with controlled impedance?
Gerber/ODB++, target impedance list, stack-up intent (or constraints), coupon requirements, and any critical RF routing notes.
Do you support “thin copper” or local copper optimization for sharper RF corners?
It can be supported when the design requires it; local thin-copper processing may improve corner accuracy versus full-board copper tolerance control.
Do you have real RF performance validation data?
Yes. The microwave filter bandwidth target is 5.7–7.0GHz; measured test is 5.86–7.19GHz, matching within <5% deviation.
What impedance tolerance can you support for this build?
This design targets ±5% impedance tolerance with verification and process locking for consistency.
Why use resin-filled vias on high-frequency microwave boards?
Resin-filled vias improve surface planarity and reduce solder wicking/void-related risk, supporting reliable RF assembly.
Our Manufacturing Capabilities
Core PCB and PCBA technologies supporting RF, high-speed, HDI, flex, power electronics and complex multilayer projects.
Submit Your PCB or PCBA Project for Engineering Review
Upload your Gerber or ODB++, fabrication drawing, stackup, BOM and project requirements. Our engineering team will review the manufacturing scope, technical risks and quotation requirements.


