H743 Flight Controller for 6S–12S UAVs
H743 Flight Controller for 6S–12S UAVs
H743 Flight Controller for 6S–12S UAVs
H743 Flight Controller for 6S–12S UAVs
H743 Flight Controller for 6S–12S UAVs
H743 Flight Controller for 6S–12S UAVs
H743 Flight Controller for 6S–12S UAVs
+
  • H743 Flight Controller for 6S–12S UAVs
  • H743 Flight Controller for 6S–12S UAVs
  • H743 Flight Controller for 6S–12S UAVs
  • H743 Flight Controller for 6S–12S UAVs
  • H743 Flight Controller for 6S–12S UAVs
  • H743 Flight Controller for 6S–12S UAVs
  • H743 Flight Controller for 6S–12S UAVs

H743 Flight Controller for 6S–12S UAVs

H743 flight controller with dual ICM42688 IMUs, MicroSD and 30.5 mm mounting. PCB/PCBA and OEM/ODM manufacturing services for UAV electronics projects.

UFC-H743-01 is an STM32H743-based flight controller for 6S–12S multirotor platforms. Dual ICM42688 IMUs, onboard OSD, MicroSD storage and a 30.5 × 30.5 mm mounting pattern support flight-control integration. For UAV brands and hardware teams developing their own electronics, UltroNiu also provides PCB fabrication, component sourcing and PCBA assembly—with OEM/ODM collaboration and finished-board volume supply.

STM32H743480 MHz MCU
6S–12SLiPo input range
Dual ICM42688Inertial sensors
40 × 40 mmBoard outline
30.5 × 30.5 mmMounting pattern
MicroSDRemovable logging media
01 / Product overview

A flight controller for high-voltage multirotor builds

Choose a controller by the constraints of your aircraft: battery configuration, mounting clearance, sensor hardware and peripheral connections. UFC-H743-01 pairs an H743 processing platform with a 6S–12S input specification and compact 40 mm PCB outline.

For engineering teams, these specifications make the board straightforward to compare with an existing flight-control design. For UAV brands, the same hardware category can also be the starting point for a customer-owned flight controller PCB/PCBA manufacturing project.

12S power architectureDual IMU hardwareMultiperipheral integration
UFC-H743-01 front and reverse-side product views
UFC-H743-01 front and reverse-side product views
02 / Technical specifications

H743 flight controller specifications

The following specification set supports initial product comparison and mechanical planning. Pin assignments are board-revision specific and are provided through the matching wiring documentation.

Parameter Specification
Model UFC-H743-01
Product type H743 multirotor flight controller
Main processor STM32H743VIT6; 480 MHz
Inertial sensors Dual ICM42688
Battery input 6S–12S LiPo
OSD AT7456E
Logging media MicroSD slot
Mechanical size 40 × 40 mm
Mounting pattern 30.5 × 30.5 mm
PCB construction 6-layer, 1 oz copper
Peripheral connections Motor-control, receiver, video, UART and sensor pads/connectors
External power connections 5V and 12V rails
USB USB Type-C
UFC-H743-01 STM32H743 flight controller, component and pad side
UFC-H743-01 STM32H743 flight controller, component and pad side
03 / Hardware integration

Power, sensors and peripheral integration

6S–12S power-system planning

A high-voltage UAV build requires the controller input, ESC power system, peripheral regulators and wiring to be evaluated together. The 6S–12S rating is a key starting point for the electrical design.

H743 + dual IMU platform

STM32H743 processing and two ICM42688 devices provide an H7-class control and inertial measurement hardware base. Sensor behavior and flight modes are determined by the installed software configuration.

Practical peripheral access

Surface pads and board connectors provide routes to motor-control signals, video-related wiring, receiver and serial peripherals. A MicroSD socket supports removable flight-log media.

UFC-H743-01 board outline 40 mm × 40 mm and 30.5 mm mounting centers
UFC-H743-01 board outline 40 mm × 40 mm and 30.5 mm mounting centers

Plan the installation before wiring

The 40 × 40 mm outline and 30.5 × 30.5 mm mounting pattern help integrators evaluate the frame stack, cable routing and access to the USB and MicroSD interfaces.

For harness design and firmware setup, use the connection documentation for the exact controller revision.

Request Product Documentation
04 / The UltroNiu advantage

Your UAV design. Our PCB and PCBA manufacturing.

Engineering-led manufacturing partnership

From a flight controller product to production of your own electronics

An off-the-shelf H743 controller is useful when you need finished hardware. When your UAV brand has its own design, the requirement shifts to PCB fabrication, component availability, assembly readiness and repeatable production.

UltroNiu works with customer-owned design data for flight controllers, ESCs and other UAV electronic assemblies. We review the manufacturing package, coordinate fabrication and component sourcing, and build PCBA to the agreed scope.

Discuss Your PCB/PCBA Project

PCB fabrication

Fabrication planning for multilayer flight-control, power and peripheral boards based on approved Gerbers, drawings and stackup requirements.

Component sourcing & PCBA

BOM review, sourcing coordination, SMT/THT assembly and connector installation for customer-designed UAV boards.

NPI & manufacturing review

DFM/DFA discussion, inspection planning and prototype-to-production coordination matched to the actual manufacturing program.

05 / PCB fabrication

PCB production for flight controllers and ESC electronics

Flight-controller boards combine fine-pitch digital devices, power distribution and dense connector layouts. ESC boards add their own current-path and thermal constraints. PCB fabrication is specified from the customer's electrical design and approved manufacturing files.

06 / Assembly and verification

PCBA assembly, inspection and engineering checks

For a UAV electronics PCBA program, assembly quality is built from the BOM, placement data, connector requirements and test definition—not from component specifications alone. Inspection and electrical or functional verification are matched to the approved project scope.

Flight-controller PCBA panel with mounted components
Flight-controller PCBA panel with mounted components

From sourced components to assembled boards

UltroNiu supports component procurement, SMT/THT assembly and board-level manufacturing coordination. Manufacturing review covers assembly drawings, component orientation, pad geometry and the inspection requirements for the build.

For customers progressing from engineering samples to repeat orders, maintaining approved revisions and production files helps keep each build aligned with the intended hardware configuration.

08 / How we work

Three ways to work with UltroNiu

PCB & PCBA manufacturing

You have the design. Provide Gerber or ODB++, BOM, placement files, drawings and expected quantities for a project-based manufacturing review and quotation.

Get a PCB/PCBA Quote

OEM / ODM project

You have a product requirement. Share the UAV application, electrical interfaces, mechanical envelope and program goals to discuss a tailored engineering and supply scope.

Discuss OEM / ODM

Finished-board bulk supply

You need the UFC-H743-01. Send your anticipated quantity, delivery destination and purchasing requirements for a volume supply quotation.

Request Bulk Pricing
1 · Share requirementsProduct model or your board's design package and target quantity.
2 · Review the scopeManufacturing data, sourcing, assembly and test expectations.
3 · Align the buildAgree on quotation, product revision and production requirements.
4 · Move to productionProceed with the selected PCB/PCBA or finished-product program.
09 / Frequently asked questions

H743 controller and manufacturing questions

Is UFC-H743-01 suitable for 12S LiPo systems?

The stated input range is 6S–12S LiPo. Select ESCs, regulators, cables and peripheral power connections according to the complete aircraft power architecture.

What controller and IMU hardware does the board use?

UFC-H743-01 uses an STM32H743VIT6 processor operating at up to 480 MHz and two ICM42688 inertial sensors.

What is the mounting pattern?

The PCB outline is 40 × 40 mm with 30.5 × 30.5 mm mounting-hole centers.

Can UltroNiu manufacture our own flight controller PCB or PCBA?

Yes. UltroNiu offers PCB fabrication, component sourcing and PCBA assembly for customer-owned UAV electronics designs. Send Gerber/ODB++, BOM, assembly information and expected quantities for quotation.

What should we provide for a PCBA quotation?

The most useful starting package includes Gerber or ODB++, a BOM with manufacturer part numbers, component placement data, assembly drawings, build quantity and any programming or test requirements.

Can we order completed UFC-H743-01 flight controllers in volume?

Yes. Contact UltroNiu with the model, expected quantity and delivery requirements to discuss bulk supply.

10 / Project inquiry

Start with your hardware requirement

Need H743 boards—or a manufacturing partner for your own FC/ESC design?

Share the product model or your PCB/PCBA files, BOM and target volumes. UltroNiu can discuss the corresponding fabrication, assembly, OEM/ODM or finished-board purchasing route.

Submit PCB/PCBA RequirementsRequest UFC-H743-01 Pricing

Related Products

Project Launch CTA

Upload your files and receive a free DFM review and quote within 12 hours. We ensure all data is kept strictly confidential under NDA.

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit