5.8GHz 8W FV8000 Analog FPV Video Transmitter
Model FV8000 · OEM Module Supply & RF PCB/PCBA Manufacturing
FV8000 combines selectable RF power settings up to 8W with 96 preset channels, SmartAudio control and active cooling. Its 36 × 36mm module and 25g weight support space-conscious UAV and FPV integration. Source finished transmitters for OEM programs, or work with UltroNiu on RF PCB manufacturing, PCBA assembly and project-specific hardware.
8W Analog VTX Built for OEM Drone Integration
FV8000 is a compact, actively cooled analog video transmitter for equipment brands and UAV integrators requiring a defined 8W-class VTX module.
Its 36 × 36mm mechanical footprint, 30.5 × 30.5mm mounting pattern and selectable RF output levels provide practical starting points for hardware selection. Customers can purchase the finished unit or engage UltroNiu for separate RF PCB/PCBA manufacturing projects.
Why Choose FV8000 Instead of a Generic VTX?
A transmitter is only useful when its mechanical fit, power supply, control and thermal requirements work with the customer's platform. FV8000 gives engineers a defined module to evaluate while supporting separate manufacturing engagement.
Adjustable Output to 8W
Select 25mW through 8000mW nominal output levels for setup and application-dependent RF planning.
96 Frequency Presets
Twelve bands with eight channels each support a range of analog receiver configurations, subject to regional permissions.
Active Heat Dissipation
Built-in fan and heatsink help manage the thermal demands of high-output operation with adequate airflow.
OEM Supply + PCBA
Source finished modules or request customer-designed RF PCB fabrication, SMT assembly and engineering support.
Selectable RF Power Settings up to 8W
Select 25, 1000, 3000, 5000 or 8000mW nominal RF output to suit system integration and operating requirements. Maximum output is a nominal setting; actual link performance depends on the complete RF system, installation and operating conditions.
SmartAudio & OSD Configuration
Adjust supported settings using SmartAudio; onboard button controls also provide channel, band and output-level selection.
Pit Mode & Delayed PA Startup
Supports Pit Mode and an approximately three-second power-amplifier start delay, for controlled startup.
FV8000 Technical Specifications
These are configuration-level values for the FV8000 8W hardware configuration. Customer-specific electrical and environmental acceptance limits should be stated in the purchase specification.
| Parameter | FV8000 |
|---|---|
| Model | FV8000 |
| Product type | 5.8GHz-class analog FPV video transmitter |
| Maximum nominal RF setting | 8000mW / 8W |
| Switchable power | 25 / 1000 / 3000 / 5000 / 8000mW |
| Channel presets | 96 channels · 12 bands × 8 |
| Frequency presets | 4900–6060MHz across discrete programmed channels |
| Operating input | 14.6–28V DC |
| 5V auxiliary output | Camera power, below 500mA maximum |
| Controls | SmartAudio + button; OSD and Pit Mode |
| Microphone | Not supported |
| RF connector | SMA |
| Cable connector | JST 6-pin |
| Main board size | 36 × 36mm |
| Mounting pattern | 30.5 × 30.5mm |
| Module weight | 25g excluding antenna |
| Thermal hardware | Built-in cooling fan and heatsink |
| Reference accessory set | VTX ×1, cable ×1, pigtail ×1; final packing list per quotation |
Complete 96-Channel Analog VTX Frequency Table
FV8000 provides 96 discrete preset channels. Frequency names are band labels rather than regulatory approvals; the 5.8GHz product label does not mean every preset is inside the same license-exempt spectrum allocation.
| Band | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
|---|---|---|---|---|---|---|---|---|
| Band A | 5474 | 5492 | 5510 | 5528 | 5546 | 5564 | 5582 | 5600 |
| Band b | 5362 | 5399 | 5436 | 5473 | 5510 | 5547 | 5584 | 5621 |
| Band E | 5325 | 5348 | 5366 | 5484 | 5402 | 5420 | 5438 | 5456 |
| Band F | 5129 | 5159 | 5189 | 5219 | 5249 | 5279 | 5309 | 5339 |
| Band r | 4990 | 5020 | 5050 | 5080 | 5110 | 5140 | 5170 | 5200 |
| Band P | 5333 | 5373 | 5413 | 5453 | 5493 | 5533 | 5573 | 5613 |
| Band L | 4900 | 4940 | 4921 | 4958 | 4995 | 5032 | 5069 | 5099 |
| Band U | 5960 | 5980 | 6000 | 6020 | 6030 | 6040 | 6050 | 6060 |
| Band O | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
| Band H | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
| Band T | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 |
| Band n | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
The table shows individual preset center frequencies in MHz; receiver tuning and allowable local spectrum usage must be checked for each intended market. Swipe the table horizontally on narrow screens.
36 × 36mm Installation, JST Wiring & SMA RF
Mechanical and power design
- Allow sufficient airflow through the rear fan and heat-sink fins.
- Provide 14.6–28V DC at the power input with adequate supply-current headroom.
- Respect the 30.5 × 30.5mm mounting pattern and verify enclosure clearance.
Signal & RF connections
- The module RF port is SMA; match the antenna or adapter to the actual module connector.
- Use the approved 6-pin harness drawing to check the 14.6–28V input, power ground, SmartAudio, video input, signal ground and 5V output.
- Connect a compatible antenna or appropriate matched RF load before applying power; do not operate without the cooling fan.
For production assembly, use the approved connector drawing and harness drawing. Installation depends on the flight controller, camera, antenna assembly and local radio spectrum rules.
Finished FV8000 Supply or RF PCB / PCBA Manufacturing
UltroNiu supports two different purchasing routes: ready-to-integrate video transmitters and manufacturing services for customer-owned RF hardware. This is useful for drone brands that need a reference module now and engineering or supply-chain flexibility for later platform revisions.
Finished FV8000 Modules
Discuss sample qualification, accessory configuration, agreed acceptance criteria, packaging and volume supply for integration into OEM systems.
Customer RF PCB & PCBA Programs
Request RF PCB fabrication, DFM, component sourcing, SMT assembly, inspection planning and board-level production from your own technical files.
Electronics manufacturing and inspection
Actual photographs of PCB/PCBA equipment and production activity are shown below. They illustrate UltroNiu manufacturing services; they are not represented as lot-specific FV8000 acceptance records.
DFM & Incoming Materials
Discuss material selection, stack-up, RF trace transitions, bill-of-material controls and inspection steps for the approved design.
Project-Specific RF Verification
Define RF output measurement, frequency presets, electrical functionality and thermal behavior in the acceptance plan. Factory images alone do not prove RF test results.
OEM Integration & Customization Options
For B2B programs, the practical question is how quickly an approved module can fit a platform—or whether the customer requires a separate manufactured design. UltroNiu provides a manufacturing and engineering discussion path for both.
01. Complete Module Supply
Request finished FV8000 modules for samples, pilot builds or ongoing OEM supply with clearly defined accessories, labeling and procurement terms.
02. Customer RF PCB & PCBA
Provide fabrication files, BOM and manufacturing requirements for independent RF PCB fabrication and SMT assembly projects.
03. Interface & Configuration Review
Discuss wiring, RF pigtail selection, power presets, channel requirements and mechanical integration for engineering feasibility review.
04. OEM Branding & Packaging
Review product marking, cable kits, packaging, documentation and delivery configurations. Any customization requires design and commercial approval.
Provide These Details for a Useful Quotation
Target country and usage · intended channel and RF power · estimated volume · camera/flight-controller interface · mechanical clearance · harness and pigtail requirements · sample quantity · qualification documents · expected delivery date.
Start an Engineering ReviewFV3000 vs FV5000 vs FV8000
Choose among the compact analog VTX options based on nominal RF power, connector type, supply budget and channel-map requirements. Matching footprints do not by themselves establish drop-in electrical equivalence.
| Parameter | FV3000 | FV5000 | FV8000 |
|---|---|---|---|
| Maximum nominal RF output | 3W | 5W | 8W |
| Preset channels | 80CH | 96CH | 96CH |
| PCB outline | 36 × 36mm | 36 × 36mm | 36 × 36mm |
| Weight excluding antenna | 23g | 25g | 25g |
| Module RF interface | MMCX | MMCX | SMA |
| DC input | 14–28V | 14.6–28V | 14.6–28V |
| Cooling | Fan / heatsink | Fan / heatsink | Fan / heatsink |
Mechanical clearance, antenna matching and power supply should be reviewed for each selected module.
FV8000 Purchasing & Integration FAQs
Is the FV8000 sold as a finished transmitter?
Yes. Request the complete module configuration and accessory/quantity requirements for a B2B quotation.
What RF output power settings are supported?
The available settings listed for this configuration are 25, 1000, 3000, 5000 and 8000mW, with 8W as the maximum nominal setting.
Does FV8000 support 96 channels?
It offers 12 groups of eight preset frequencies. The receiving equipment must support the selected channel and local transmission rules apply.
What DC supply is required?
14.6–28V DC input. The module provides a 5V auxiliary camera output rated below 500mA maximum.
What RF connector does the FV8000 use?
The transmitter RF connector is SMA. A pigtail may have a different connector at the antenna end, depending on configuration.
Can I control channels and output via SmartAudio?
SmartAudio is supported for OSD-based configuration; the board also provides a physical button and supports Pit Mode.
What are the mechanical dimensions?
36 × 36mm module footprint, 30.5 × 30.5mm mounting pattern and 25g module weight excluding antenna.
Are the antenna, power lead and accessories included?
The reference accessory set comprises a VTX, cable and RF pigtail. Specify the required antenna and harness configuration in the purchase order.
Can you manufacture my own RF PCB or VTX PCBA?
Yes. UltroNiu can review customer-owned files for RF PCB fabrication, component sourcing, SMT assembly and NPI/manufacturing support.
Do you provide MOQ, samples, reports and lead-time information?
Include your volume, shipping country and acceptance requirements in the RFQ. Sample availability, MOQ, test documentation and production schedule are quoted by configuration.
Does FV8000 have a guaranteed video transmission distance?
No universal distance is stated. Actual performance depends on antennas, receiver, installation, interference, frequency, permitted power and test conditions.
Can FV8000 operate on all presets worldwide?
No. Local frequency allocation, licensing, output-power and product conformity requirements vary by market. The system integrator should confirm applicable restrictions.
Request an 8W VTX Quote or Custom RF PCB Build
Need FV8000 Modules or a Customer-Specific RF Build?
Send the required quantity, destination market, mounting envelope, camera/video signal, SMA pigtail requirements, preferred frequency presets and test acceptance criteria. We can discuss finished transmitter supply or a separate PCB/PCBA manufacturing program.
Email SalesWhatsApp InquiryEngineering ReviewRelated Products
5.8G 8W MAX FPV Video Transmitter
Up to 8W RF output, 80 channels and SmartAudio control. Active cooling for UAV systems requiring higher transmit power.
5.8GHz 3W FV3000 Analog FPV Video Transmitter
Compact 36 × 36mm VTX with 3W output, 80 channels and SmartAudio. MMCX interface and active cooling for OEM integration.
5.8GHz 5W FV5000 Analog FPV Video Transmitter
5W RF output, 96 channels and SmartAudio in a 36 × 36mm module. MMCX connectivity and active cooling for compact UAV platforms.
Project Launch CTA
Upload your files and receive a free DFM review and quote within 12 hours. We ensure all data is kept strictly confidential under NDA.
World-class PCB & PCBA manufacturer focused on high-frequency and high-reliability boards for defense, aerospace, automotive and industrial electronics.
You can unsubscribe at any time with a single click.
Copyright © 2025 UltroNiu Electronics Group All Rights reserved.
Sorry, there is currently no content in the current column
You can check other sections
Business License