F722 Flight Controller for 2S–6S FPV Drones
F722 Flight Controller for 2S–6S FPV Drones
F722 Flight Controller for 2S–6S FPV Drones
F722 Flight Controller for 2S–6S FPV Drones
F722 Flight Controller for 2S–6S FPV Drones
F722 Flight Controller for 2S–6S FPV Drones
+
  • F722 Flight Controller for 2S–6S FPV Drones
  • F722 Flight Controller for 2S–6S FPV Drones
  • F722 Flight Controller for 2S–6S FPV Drones
  • F722 Flight Controller for 2S–6S FPV Drones
  • F722 Flight Controller for 2S–6S FPV Drones
  • F722 Flight Controller for 2S–6S FPV Drones

F722 Flight Controller for 2S–6S FPV Drones

2S–6S F722 flight controller with STM32F722RET6, ICM42688, 5V/3A + 10V/2.5A BEC, 16M Blackbox and 36 × 36 mm PCB.

UFC-F722-01 is an F722 flight controller for 2S–6S FPV multirotor builds. It combines the STM32F722RET6 MCU, ICM42688 sensing, onboard OSD, 16M Blackbox storage and two BEC rails in a 36 × 36 mm board. For UAV brands developing their own flight-control electronics, UltroNiu also provides PCB fabrication, component sourcing and PCBA assembly, alongside OEM/ODM project support and finished-board volume supply.

STM32F722F7-series MCU
2S–6SLiPo input
ICM42688Gyro sensing
36 × 36 mmBoard outline
5V + 10V5V/3A & 10V/2.5A BEC
8 channelsMotor-control signal outputs
01 / Product overview

F722 flight control for 2S–6S FPV integration

The UFC-F722-01 brings flight-control processing, motion sensing, video OSD and auxiliary power into one 36 × 36 mm board. It is a practical option for multirotor integrators looking for an F7 controller with a 30.5 × 30.5 mm mounting pattern and eight motor-control signal outputs.

One board can be evaluated for finished-product sourcing, while a customer-owned FC or ESC design can take a separate PCB/PCBA manufacturing route. The two programs have different inputs: a product model and quantity for finished boards, or an approved design package and BOM for manufacturing.

02 / Hardware essentials

Processing, sensing and peripheral power

F7 processing

An STM32F722RET6 controller for the flight-control firmware and peripheral communication architecture.

Motion and video

ICM42688 gyro design, onboard barometer and AT7456E analog OSD hardware.

Dual power rails

5V/3A and 10V/2.5A BEC outputs support separate peripheral power requirements.

Logging and signals

16M Blackbox storage, onboard current sensing and eight motor-control signal outputs.

UFC-F722-01 front and reverse board overview with key hardware highlights
F722 controller hardware overview
UFC-F722-01 board dimensions 36 by 36 millimeters and 30.5 millimeter mounting pattern
36 × 36 mm outline · 30.5 × 30.5 mm mounting pattern
03 / Technical specifications

UFC-F722-01 technical specifications

Key electrical, mechanical and PCB details for product comparison, integration planning and volume procurement.

Product model UFC-F722-01
Product category F722 Flight Controller
MCU STM32F722RET6
IMU ICM42688 · dual-gyro design
OSD AT7456E
Barometer Integrated
Blackbox 16M
Battery input 2S–6S LiPo
BEC outputs 5V/3A; 10V/2.5A
Motor-control signals 8 outputs (FC signals, not integrated ESC power stages)
Current sensing Integrated
USB Type-C
Board dimensions 36 × 36 mm
Mounting pattern 30.5 × 30.5 mm
Board net weight 8.5 g
Onboard LEDs 4 programmable LEDs
External LED provision Programmable LED support with 10V auxiliary supply
DJI Air Unit connector Provided
VTX supply switch Configurable power-control function
Firmware designation F722V2
PCB 6-layer, 1oz copper
PCB processing Resin-filled vias
Regulator description Industrial-grade LDO
Listed capacitors Murata
Packaging weight 40 g
Packaging dimensions 64 × 64 × 35 mm
Need a manufacturing quote for your own FC design? Send your Gerber or ODB++, BOM, assembly data and target volumes. Submit a PCB/PCBA project.
04 / FC, ESC & peripherals

Plan the complete flight-control electronics stack

The controller connects the MCU and sensors to the surrounding UAV electronics: ESC channels, receiver, camera, video transmitter and other peripherals.

ESC integration: eight motor-control signal outputs provide connections for external ESC hardware. The board itself is a flight controller, not an 8-in-1 ESC.

Peripheral power: two BEC outputs provide 5V and 10V rails. Select compatible external devices and plan the total load for each output.

Mechanical fit: a 36 × 36 mm outline and 30.5 × 30.5 mm mounting pattern support stack layout planning.

UFC-F722-01 flight controller front and back in an FPV multirotor application visual
FPV multirotor application context · product visualization

FC–ESC interface

Controller signals and current monitoring need to match the selected ESC and electrical layout.

Video & receiver

Plan camera, VTX and receiver interfaces around the required wiring and auxiliary supplies.

Integration documents

Use the PCB silkscreen and approved wiring information when completing peripheral assignments.

05 / The UltroNiu difference

Your flight-control design, supported by PCB & PCBA manufacturing

Buying an F722 controller solves one requirement. Developing a flight-controller product under your own brand creates a different set of manufacturing questions: PCB construction, material and component availability, assembly access, inspection and repeatable builds.

UltroNiu supports customer-owned UAV electronics designs with PCB fabrication, component sourcing and PCBA assembly. That includes flight controllers, ESCs and related electronics, with manufacturing scope based on the approved design package.

Discuss Your FC PCB/PCBA Project

PCB fabrication

Produce the approved multilayer FC or power PCB to the project stackup and fabrication data.

Component sourcing

Align BOM and assembly materials with purchasing and project requirements.

PCBA assembly

Component placement, reflow, through-hole assembly and connector integration.

Inspection planning

Define assembly inspection and application-specific checks for the agreed build.

06 / PCB fabrication evidence

PCB production for FC and ESC electronics

Flight-controller PCB fabrication demands attention to fine-pitch component footprints, connector placement and power distribution. ESC designs introduce higher-current paths and thermal constraints. The manufacturing approach follows the customer’s approved drawings and fabrication files.

07 / PCBA, inspection & production

From component assembly to inspection and repeat builds

For UAV PCBA programs, the BOM, placement data, connector details and inspection plan matter as much as component selection. Related flight-control manufacturing photos show the types of board handling, bench work and inspection involved in electronic assembly programs.

UAV controller PCBA four-board panel with populated electronic components
Populated FC-type PCB assembly panel · related manufacturing example

Build to the approved manufacturing package

For customer-owned PCB/PCBA designs, fabrication drawings, Gerber/ODB++, BOM, placement data and acceptance requirements establish the production scope. Component sourcing and assembly can then be coordinated against the same approved revision.

Make verification part of the project

Inspection stages and electrical or functional checks are defined for the application and agreed test procedure. This supports engineering communication across prototype and repeat-order builds.

09 / How to work with us

Three ways to source or manufacture your UAV electronics

PCB & PCBA Manufacturing

You own the board design. Supply Gerber/ODB++, BOM, pick-and-place data, drawings, quantity and inspection requirements. We can review the corresponding fabrication and assembly program.

Get a PCB/PCBA Quote

OEM / ODM Project

You are planning a customized FC or UAV module. Share your electrical interfaces, board envelope, target use and production plan to discuss the required engineering and manufacturing scope.

Discuss OEM/ODM

Finished FC Volume Supply

You need the UFC-F722-01. Send the exact product model, anticipated order quantity and destination for a finished-board supply quotation.

Request Bulk Pricing
1 · Define the needFinished board or customer-owned design.
2 · Share the inputsModel and quantity, or manufacturing files and BOM.
3 · Review scopeAlign sourcing, assembly and inspection requirements.
4 · Quote the projectDiscuss quantity, lead time and supply terms.
10 / Questions & inquiry

F722 flight controller and manufacturing FAQs

What battery range is listed for UFC-F722-01?

The product specification is 2S–6S LiPo. The connected ESC and peripherals should be selected for the complete aircraft electrical system.

How large is the UFC-F722-01?

The board outline is 36 × 36 mm, with a 30.5 × 30.5 mm mounting-hole pattern. The listed net weight is 8.5 g.

Does the board include an ESC?

No. UFC-F722-01 is a flight controller with eight motor-control signal outputs for external ESC hardware.

What peripheral power outputs are provided?

The two listed BEC rails are 5V/3A and 10V/2.5A. Power allocation must match each connected device’s requirements.

Can UltroNiu manufacture our own flight-controller PCB or PCBA?

Yes. UltroNiu provides PCB fabrication, component sourcing and PCBA assembly services for customer-owned UAV electronics designs.

Which files help start a PCB/PCBA quotation?

Gerber or ODB++, fabrication drawings, BOM with part numbers, placement files, expected quantity and assembly or test requirements are useful inputs.

Can we order UFC-F722-01 in volume?

Yes. Send your desired quantity, destination and purchasing requirements for a finished-board quotation.

Have an F722 project—or your own FC/ESC design?

Send your PCB/PCBA manufacturing files or the UFC-F722-01 model and planned volume. UltroNiu can discuss the appropriate manufacturing, OEM/ODM or finished-board supply route.

Submit PCB/PCBA RequirementsRequest F722 Pricing

Related Products

Project Launch CTA

Upload your files and receive a free DFM review and quote within 12 hours. We ensure all data is kept strictly confidential under NDA.

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit