High Frequency PCB Capabilities

High Frequency PCB Capabilities

High-Frequency (RF/Microwave) PCB Manufacturing Capabilities

 

 

 

Scope & Use Cases
Production-grade RF and microwave PCBs for 500 MHz up to mmWave, covering microstrip, stripline, and hybrid dielectric stackups. Built for automotive 77 GHz radar, SATCOM (Ku/Ka), phased arrays, RF front-ends/PA, aerospace & defense. Conforms to IPC-6018 performance requirements for high-frequency printed boards; RF laminates per IPC-4103. 

 

 

 

Parameters (RF/Microwave)

 

Item

Mass-Production Capability

RF Notes

Min. Line/Space

0.05/0.05 mm

Down to 0.035/0.035 mm in HDI fan-out zones when required.

Min. Drill (Mech./Laser)

0.15 mm / 0.075 mm

Laser microvias with resin plug or copper-filled VIP for BGA RF escape.

Back-drill (Stub Control)

Residual stub ≤ 0.25 mm (≈10 mil) typical

Target ≤ 10 mil to reduce reflections on high-speed/RF links.

Layer Count / Thickness

Up to 68 L, 0.2–12 mm

Supports sequential lamination and HDI/ELIC for dense RF + digital mixes.

Layer Registration

±0.025–0.06 mm

Maintains coupling gaps and impedance stability in multi-lamination builds.

Impedance Control

±5% (MP); special build to ±2%

Tight tolerance via laminate Dk/Df control, copper roughness, etch comp., and solder mask windowing.

RF Materials

Rogers RO4350B/RO4003C/RO4835; Taconic TLY-5/CER series; PTFE/ceramic; Hybrid (FR-4 + RF)

RO4350B Dk≈3.48±0.05, Df≈0.0037@10 GHz; TLY-5 Dk≈2.17–2.40, Df≈~0.0009@10 GHz.

Surface Finish

ENIG, ENEPIG, ImmAg, OSP, selective hard gold

ENIG/ENEPIG common on RF pads; ImmAg favored on antenna zones to minimize contact loss.

Vias & Fill

Blind/buried via, resin plug, copper fill, VIP

Reduces via inductance and improves reflow reliability in RF BGAs.

Routing & Controlled Depth

Back-drill + depth routing

Preserves field distribution near antenna feeds and coupling gaps.

Test & Metrology

Flying-probe/fixture test, TDR, differential impedance, microsection

RF consistency verified in time domain + cross-section QC.

 

 

 

RF Process Highlights

  • Materials & Stackups. Rogers RO4350B/RO4003C/RO4835 and Taconic TLY-5/CER-10 low-loss systems; available as homogeneous or mixed-dielectric multilayers per IPC-6018 types (incl. metal-back options). 
  • Impedance & Layout. Production tolerance ±5%; ±2% available as a special build. Favor arcs/45° miters over 90° corners; manage copper roughness and mask clearance for predictable Zo. (Standards orientation via IPC-4103 for HF materials.) 
  • Stub Suppression. Back-drilling with defined stop layers; design for ≤ 10 mil residual stub; slightly larger back-drill bit ensures full stub removal. 

 

 

Representative RF Materials

  • Rogers RO4350B — Dk 3.48 ± 0.05, Df 0.0037@10 GHz; FR-4-like processing; stable CTE. 
  • RO4003C / RO4835 — low tolerance Dk/Df families for broadband/millimeter-wave designs. 
  • Taconic TLY-5 / CER-10 — very low Df; 77 GHz-proven insertion loss; Dk tunable by resin content. 

 

 

Quality & Standards

  • Built and inspected to IPC-6018 for HF/microwave PCBs; laminate selection per IPC-4103 slash sheets. Verification includes TDR, controlled-impedance test coupons, and microsections.

 

Get Custom Quote

PRODUCTS CENTER

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit