Ceramic PCB Capabilities
Get Custom Quote
PRODUCTS CENTER
Ceramic PCB Manufacturing Capabilities
Scope & Use Cases
High-reliability ceramic PCBs and substrates for power modules, high-brightness LED, RF front-ends, and harsh-environment electronics. We manufacture on alumina (Al₂O₃), aluminum nitride (AlN), and silicon nitride (Si₃N₄) with DBC, DPC, AMB and thick-film processes to deliver high thermal conductivity, electrical insulation, and excellent mechanical strength. Typical thermal conductivities: Al₂O₃ ≈ 24 W/m·K, AlN ≈ 170 W/m·K, Si₃N₄ ≈ 70–90 W/m·K.
Parameters (Mass-Production Window)
|
Item |
Capability |
Notes |
|
Substrates |
96% Al₂O₃ / AlN / Si₃N₄ |
Materials chosen by thermal, CTE, RF needs. |
|
Panel/Tile Size |
138×188 mm |
Custom sizes on request. |
|
Substrate Thickness |
0.25–2.0 mm |
Application-dependent. |
|
Copper Thickness (DBC/AMB) |
~140–350 µm (4–10 oz) |
High current & heat spreading. |
|
Copper Thickness (DPC) |
10–30 µm (base), build-up optional |
High-resolution traces, fine pitch. |
|
Trace/Space (DPC) |
≥ 60/60 µm @ 20 µm Cu |
Rule-of-thumb 3:1 width-to-thickness. |
|
Via Options |
Laser vias, through holes, filled vias |
Metallized per process route. |
|
Flatness/Warpage |
≤ 0.3%-0.5% (typical alumina refs) |
Process control & fixturing. |
|
Dielectric Strength |
~17 kV/mm (alumina ref) |
Material specific. |
|
Thermal Conductivity |
Al₂O₃ ≈ 24 W/m·K; AlN ≈ 170 W/m·K; Si₃N₄ ≈ 70–90 W/m·K |
Selection by heat path & reliability. |
Process Routes
- DBC (Direct Bonded Copper) — Copper foil is bonded to ceramic at high temperature for very low thermal resistance and heavy copper (4–10 oz). Ideal for IGBT/power modules.
- DPC (Direct Plated Copper) — Thin copper (10–30 µm) sputter/seed + electroplating, enabling ~60 µm/60 µm features at 20 µm Cu; best for high density & RF.
- AMB (Active Metal Brazed) — Active braze bonds copper to Si₃N₄ (and others) for outstanding mechanical toughness & cycling lifetime in automotive inverters.
- Thick-Film — Screen-printed Ag/Pt-Ag conductors and dielectric/glazes on alumina for cost-efficient hybrids.
Materials (Quick Comparison)
|
Material |
Thermal Conductivity |
CTE (ppm/°C) |
Strength & Notes |
Applications |
|
Al₂O₃ (96%) |
~24 W/m·K |
~6.5–8.0 |
Mature, cost-effective, good insulation |
LED, general hybrids, sensors. |
|
AlN |
~170 W/m·K |
~3–4 |
Excellent thermal match to Si/GaN, very low loss |
High-power RF, laser/HP-LED, high-density power. |
|
Si₃N₄ |
~70–90 W/m·K |
~3 |
High fracture toughness & cycling reliability |
Automotive inverter/baseplates, traction. |
Surface Finishes
ENIG / ENEPIG / Immersion Silver / Selective Hard Gold — all validated on alumina & AlN with thin-/thick-film metallization; ENEPIG adds a Pd layer for wire-bond friendliness and corrosion robustness.
Quality & Standards
Design and verification aligned to IPC-2221 generic design rules (creepage/clearance, HV spacing) supplemented by ceramic-specific process controls (TDR/HiPot where applicable, micro-section).
Get Custom Quote
PRODUCTS CENTER


