Metal Core PCB Manufacturing

Metal Core PCB Manufacturing

For High-Current Power Electronics

2–12 oz Metal Core PCBs engineered for EV & ESS, industrial drives, and mission-critical power modules—where current density, thermal rise, and long-term reliability define the real limits.

portal-saas/pg2025071710004651330/cms/image/ee2422ca-9510-4116-9e7a-5f7db0585e72.png

Stable 2–12 oz Metal Core process window with consistent yield

portal-saas/pg2025071710004651330/cms/image/99e70d32-ceca-4364-b8e5-7700fde699c1.png

Power-electronics stack-up & copper balancing, co-designed by senior engineers

portal-saas/pg2025071710004651330/cms/image/c4624d95-1205-4d16-bbd8-0f24f9ebba7c.png

From bare Metal Core PCB to power-module PCBA, one qualified partner

Get Custom Quote

What Is a Metal Core PCB?


Metal Core PCBs are printed circuit boards that use significantly thicker copper than standard designs—typically 2 oz and above on selected layers, and even higher copper weights in local high-current areas. Compared with conventional 1 oz boards, they are engineered to carry higher continuous and surge currents without excessive temperature rise, spread and conduct heat away from power devices and connectors, and provide mechanically robust connection points for screw terminals, busbars and high-current plugs. Typical applications include DC links, busbars and battery connection boards in EV & ESS, power stages in industrial drives, inverters and soft starters, industrial power distribution cards and fuse / relay boards, as well as high-current test, load and burn-in boards for power semiconductors.

图片名称

Engineered current paths

Copper thickness and trace width are sized from current density and target temperature rise, rather than just “fitting” the layout.

图片名称

Reinforced terminals and pads

Local copper thickening, enlarged pads and properly anchored vias improve mechanical strength under torque, vibration and thermal cycling.

图片名称

Integrated thermal management

Copper pours, planes and thermal vias act as built-in heat spreaders and thermal paths to heatsinks, housings or cold plates.

图片名称

High-voltage and harsh-environment readiness

Stackups and clearances can be tailored for higher system voltages, elevated temperatures and polluted atmospheres.

Standard Copper PCB vs. Metal Core  PCB

Feature Heavy Copper / Thick Copper PCB (2–12 oz) Standard Copper PCB (≈ 1 oz)
Typical Role High-current power conversion and power distribution Signal, control and low/medium-power rails
Copper Thickness per Layer 2–12 oz on selected layers or local regions 0.5–1 oz
Current & Temperature Rise Designed from current density and allowable ΔT Limited before overheating
Thermal Behavior Copper itself is key heat-spreading and conduction structure Relies heavily on external heatsinks and vias
Terminal / Connector Robustness Thick copper, reinforced pads and via structures at connection points Standard pads and vias
System Architecture Can integrate busbar / cable / shunt functions into the PCB Often needs extra busbars, cables and shunts

 

Common Metal Core PCB Stack-ups

图片名称

Typical Metal Core Applications We Build For


We manufacture heavy copper PCBs for a wide range of power-electronics and high-reliability systems. Each application has its own limits for temperature rise, surge current, creepage/clearance and lifetime, and we select materials, copper thickness and stackup accordingly.

Industrial Power Supplies & Power Modules

Industrial Power Supplies & Power Modules

AC/DC and DC/DC modules, rectifiers, UPS and programmable power sources

Integrating primary and secondary power stages on a single heavy-copper board

Integrating primary and secondary power stages on a single heavy-copper board

Reinforced pads and screw terminals for reliable high-current connections

Reinforced pads and screw terminals for reliable high-current connections

Industrial Power Supplies & Power Modules

Motor Drives & Inverters

Motor Drives & Inverters

Servo drives, frequency inverters, traction drives for industrial machinery

Thick copper phases and DC-link buses for 50–300 A or higher current levels

Thick copper phases and DC-link buses for 50–300 A or higher current levels

Optimized creepage/clearance and thermal paths around power semiconductors

Optimized creepage/clearance and thermal paths around power semiconductors

Motor Drives & Inverters

EV / HEV & Energy Storage Power Electronics

EV / HEV & Energy Storage Power Electronics

Battery junction boxes, contactor boards, battery disconnect units, DC fast-charge modules

Copper geometries designed for continuous and fault currents in EV/ESS environments

Copper geometries designed for continuous and fault currents in EV/ESS environments

High dielectric strength materials and surface finishes for high-voltage insulation

High dielectric strength materials and surface finishes for high-voltage insulation

EV / HEV & Energy Storage Power Electronics

Renewable Energy & Grid-Tied Equipment

Renewable Energy & Grid-Tied Equipment

Solar string inverters, wind power converters, energy-storage PCS

High copper thickness for DC busbars and AC outputs within compact form factors

High copper thickness for DC busbars and AC outputs within compact form factors

Robust designs for outdoor temperature cycles and long service life

Robust designs for outdoor temperature cycles and long service life

Renewable Energy & Grid-Tied Equipment

Railway, Industrial & Harsh-Environment Power Cards

Railway, Industrial & Harsh-Environment Power Cards

Railway power distribution, cranes, mining machines, heavy industrial equipment

Stable performance under vibration, shock and contamination

Stable performance under vibration, shock and contamination

Conformal coating and surface treatments suitable for harsh atmospheres

Conformal coating and surface treatments suitable for harsh atmospheres

Railway, Industrial & Harsh-Environment Power Cards

High-Current Test & Burn-In Boards

High-Current Test & Burn-In Boards

Key Features

Heavy copper traces and planes to carry test currents safely

Heavy copper traces and planes to carry test currents safely

Thermal design to keep junction and fixture temperatures within limits

Thermal design to keep junction and fixture temperatures within limits

High-Current Test & Burn-In Boards

Metal Core PCB Pain Points & Our Engineering Solutions


Designing heavy copper PCBs means thinking in terms of current density, temperature rise, copper balancing and mechanical stress. We help you turn sensitive, margin-constrained power layouts into robust and manufacturable designs.

Common Heavy Copper Issues

Excessive Temperature Rise on Power Traces

Excessive Temperature Rise on Power Traces

Uneven Etching and Copper “Mushrooming”

Uneven Etching and Copper “Mushrooming”

Plating Voids & Cracks in High-Aspect-Ratio Vias

Plating Voids & Cracks in High-Aspect-Ratio Vias

Board Warpage from Unbalanced Copper

Board Warpage from Unbalanced Copper

Insufficient Creepage & Clearance at High Voltage

Insufficient Creepage & Clearance at High Voltage

Terminal & Pad Lifting Under Mechanical Stress

Terminal & Pad Lifting Under Mechanical Stress

UltroNiu Solutions

Current-density-based sizing of copper widths and thickness, plus thermal simulation guidance; use of copper pours, thermal vias and dedicated heat-spreading layers.

Current-density-based sizing of copper widths and thickness, plus thermal simulation guidance; use of copper pours, thermal vias and dedicated heat-spreading layers.

Process controls for thick copper etching, step plating recipes and optimized design rules (min gaps, neck-downs) to maintain geometry and avoid over-etch / under-etch.

Process controls for thick copper etching, step plating recipes and optimized design rules (min gaps, neck-downs) to maintain geometry and avoid over-etch / under-etch.

Dedicated drilling and plating processes for heavy copper, resin-filled and capped vias where required, microsection checks and reliability testing on coupons.

Dedicated drilling and plating processes for heavy copper, resin-filled and capped vias where required, microsection checks and reliability testing on coupons.

Stackup engineering with copper balancing on opposite layers, symmetrical copper distribution and controlled lamination profiles.

Stackup engineering with copper balancing on opposite layers, symmetrical copper distribution and controlled lamination profiles.

Clear design rules for creepage/clearance based on system voltage and pollution degree; routing and slotting strategies for insulation.

Clear design rules for creepage/clearance based on system voltage and pollution degree; routing and slotting strategies for insulation.

Enlarged annular rings, teardrops, additional copper anchors, and local thickness enhancements around screw and lug terminals.

Enlarged annular rings, teardrops, additional copper anchors, and local thickness enhancements around screw and lug terminals.

Metal Core PCB Reference Projects


From compact power modules to high-current busbar boards, our heavy copper PCBs are deployed in demanding power-electronics environments. The examples below illustrate representative capability ranges.

10-Layer Any-Layer HDI Multilayer PCB Manufacturer | Blind & Buried Via Board

HDI stands for High Density Interconnector, which is a PCB manufacturing type (technology), using micro blind/buried via technology to realize a high line distribution density. It can achieve smaller dimensions, higher performance and lower costs.

Any-Layer HDI PCB Manufacturer | 10-Layer High Density Interconnect PCB

HDI stands for High Density Interconnector, which is a PCB manufacturing type (technology), using micro blind/buried via technology to realize a high line distribution density. It can achieve smaller dimensions, higher performance and lower costs.

View All FR-4 Products

Customer Success Stories


Some power boards must carry hundreds of amps for years without complaint. Below are examples of how engineered copper thickness, stackups and process controls helped our customers achieve their targets.

Industrial Automation OEM: 160 A Motor Drive Board


Project:

Project:

Heavy copper PCB for a 160 A class motor drive used in continuous-duty industrial equipment.

Challenge:

Challenge:

Limit temperature rise on phases and DC link, while fitting into a compact mechanical envelope.

Solution:

Solution:

4 oz outer copper on power layers, widened copper buses, thermal vias and copper balancing; resin-filled vias around power devices.

Result:

Result:

Temperature rise reduced to within target limits at rated current; stable performance confirmed in endurance tests.


Energy Storage System Provider: Battery Connection Board


Project:

Project:

Heavy copper PCB for a multi-string battery connection and protection unit.

Challenge:

Challenge:

Handle continuous current and worst-case fault currents, while maintaining insulation distances for high DC voltage.

Solution:

Solution:

Localized 6–8 oz copper in busbar areas, increased creepage distances, isolation slots and tailored surface finish.

Result:

Result:

Passed high-voltage, surge and thermal cycling tests; adopted as standard platform across several ESS product lines.


Transportation Equipment Supplier: Power Distribution Card


Project:

Project:

Power distribution board for transportation equipment (auxiliary systems).

Challenge:

Challenge:

Survive vibration, shock and environmental stress without cracked joints or lifted pads at terminals.

Solution:

Solution:

Reinforced pad geometries, through-hole terminals with properly sized annular rings and balanced copper; optional conformal coating.

Result:

Result:

No PCB-related failures reported in field returns over multiple deployment seasons.


Start Your HDI Success Story

Why Choose UltroNiu for Metal Core PCBs?


Precision, Reliability, Innovation — Your Trusted Partner in PCB Manufacturing & Assembly With 20+ years of expertise, we deliver complex, high-reliability PCBs and PCBAs to global leaders across aerospace, automotive, industrial control, AI, and communication sectors. Our solutions meet the most demanding performance, compliance, and delivery requirements.

Proven Experience in Power & High-Current Boards

Years of building PCBs for power electronics, motor drives, EV/ESS and industrial power distribution.

Years of building PCBs for power electronics, motor drives, EV/ESS and industrial power distribution.

Copper & Stackup Engineering, Not Just Fabrication

We co-design copper thickness, stackups and layer usage based on current, voltage, temperature and mechanical constraints.

We co-design copper thickness, stackups and layer usage based on current, voltage, temperature and mechanical constraints.

Process Windows Tuned for Thick Copper

Dedicated etching, plating, drilling and lamination controls for heavy copper, with coupon-based verification and microsections.

Dedicated etching, plating, drilling and lamination controls for heavy copper, with coupon-based verification and microsections.

From Heavy Copper Bare Board to Power PCBA

PCB fabrication, SMT/THT assembly, conformal coating and testing integrated into one supply chain.

PCB fabrication, SMT/THT assembly, conformal coating and testing integrated into one supply chain.

Quality Systems for Long-Life Power Products

Quality management aligned with industrial, transportation and energy markets, with traceability and documentation suitable for long-life assets.

Quality management aligned with industrial, transportation and energy markets, with traceability and documentation suitable for long-life assets.

Proven Experience in Power & High-Current Boards
Copper & Stackup Engineering, Not Just Fabrication
Process Windows Tuned for Thick Copper
From Heavy Copper Bare Board to Power PCBA
Quality Systems for Long-Life Power Products
Proven Experience in Power & High-Current Boards

Proven Experience in Power & High-Current Boards

Copper & Stackup Engineering, Not Just Fabrication

Copper & Stackup Engineering, Not Just Fabrication

Process Windows Tuned for Thick Copper

Process Windows Tuned for Thick Copper

From Heavy Copper Bare Board to Power PCBA

From Heavy Copper Bare Board to Power PCBA

Quality Systems for Long-Life Power Products

Quality Systems for Long-Life Power Products

Metal Core PCB Technical Capabilities


True heavy-copper performance requires careful control of copper thickness, geometry, drilling and lamination.

Free DFM & Stack-up Review

Quality Control Process


From schematic to final assembly, we follow a process designed for high-current reliability and manufacturability.

图片名称
Power & Mechanical Review

Power & Mechanical Review

Review Gerber/CAD/ODB++ data with a focus on current paths, connection points, creepage/clearance and mechanical constraints.

Power & Mechanical Review

Review Gerber/CAD/ODB++ data with a focus on current paths, connection points, creepage/clearance and mechanical constraints.

图片名称
图片名称
Copper Thickness & Stackup Definition

Copper Thickness & Stackup Definition

Define copper thickness per layer, board thickness and copper distribution according to current, voltage and thermal requirements.

Copper Thickness & Stackup Definition

Define copper thickness per layer, board thickness and copper distribution according to current, voltage and thermal requirements.

图片名称
图片名称
Copper Balancing & DFM Rules

Copper Balancing & DFM Rules

Apply copper balancing and DFM rules to avoid warpage, ensure manufacturable trace/space and maintain plating quality in heavy copper areas.

Copper Balancing & DFM Rules

Apply copper balancing and DFM rules to avoid warpage, ensure manufacturable trace/space and maintain plating quality in heavy copper areas.

图片名称
图片名称
Controlled Manufacturing & Inspection

Controlled Manufacturing & Inspection

Use tuned etching, plating and lamination processes; verify with AOI, electrical test, microsections and mechanical checks on coupons or sample boards.

Controlled Manufacturing & Inspection

Use tuned etching, plating and lamination processes; verify with AOI, electrical test, microsections and mechanical checks on coupons or sample boards.

图片名称
图片名称
Reliability & Final Delivery

Reliability & Final Delivery

Provide boards that have passed electrical and visual inspection, with optional thermal, vibration and environmental testing, ready for assembly and long-term operation.

Reliability & Final Delivery

Provide boards that have passed electrical and visual inspection, with optional thermal, vibration and environmental testing, ready for assembly and long-term operation.

图片名称

Metal Core PCB Design & Manufacturing Resources


Current Density, ΔT Budget & Trace Geometry (IPC-2152 Done Right)

Move beyond rule-of-thumb ampacity. We map copper thickness + trace width + thermal boundary into a controllable ΔT budget, and define when to switch from traces to planes / stitched copper / metal reinforcement to avoid localized hot spots and runaway aging.

Learn more

Local Thick-Copper Regions, Copper “Busbar-in-PCB” & Plating Uniformity Control

Designing “busbar-like” copper zones is easy; manufacturing them consistently is not. We cover local thick copper, stepped copper, embedded copper blocks, and plated build-up, including how to prevent current crowding, plating dog-bone, and edge field spikes at thickness transitions.

Learn more

Creepage, Clearance & Field-Management for High-Voltage Power PCBs

High voltage reliability is governed by electric field, not “distance on a drawing.” We provide practical guidance for creepage/clearance, slots/barriers, coating strategy, and conductor edge shaping, including where failures start: contamination, sharp copper edges, and humidity-driven surface leakage.

Learn more

Via & Interconnect Strategies for Heavy Copper and High Thermal Cycling

In heavy copper, vias are not “connections” — they are fatigue concentrators. We compare via arrays, redundant vias, resin-filled vias, via-in-pad options, and define the conditions that drive failure: CTE mismatch, thermal gradient, and plating stress.

Learn more

Warpage, Copper Balance & Lamination Constraint Engineering in Heavy Copper Stackups

Flatness is a system outcome of constraint asymmetry: copper distribution, prepreg flow, lamination pressure history, and layer-to-layer CTE mismatch. This resource explains how to build stackups that remain manufacturable while controlling bow/twist, pad tilt risk, and assembly yield.

Learn more

Prototype-to-Volume Robustness for Power Electronics: Yield Collapse Prevention

Prototype success is a local event; volume reliability is a statistical outcome. We define the controls that prevent heavy copper programs from “quietly failing” during ramp: lot-to-lot material spread, equipment drift, plating uniformity, AOI escape mechanisms, and thermal aging margin.

Learn more
Visit Full Knowledge Center

Project Launch CTA

Upload your files and receive a free DFM review and quote within 12 hours. We ensure all data is kept strictly confidential under NDA.

Supported formats: PDF, DWG, Gerber, Excel (Max 50MB)
Submit

Metal Core PCB FAQ


From what current level should I consider a heavy copper PCB?

When required currents (continuous or surge) lead to unacceptable temperature rise with standard copper thickness, or when mechanical and thermal robustness at connection points becomes critical, heavy copper should be evaluated. This often starts in the tens of amps and above, depending on geometry and cooling.

What copper thickness can you support?

We support a range from 2 oz upward, with higher values available on selected layers subject to stackup and manufacturability review. Exact limits depend on board size, layer count and design details.

How do I estimate the required copper width for my current?

Share your current, allowable temperature rise, ambient conditions and cooling concept, and we can provide sizing guidance and design rules tailored to your application.

Does heavy copper always increase cost significantly?

Heavy copper does increase material and process costs, but it can reduce total system cost by eliminating separate busbars, cables or additional mechanical parts. We can help you evaluate the trade-offs.